## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
Right now the authors search dropdown might take a long time to load if
amount of authors is huge.
Example: (In the video below, there are about 10000 authors, and it
takes about 10 seconds to open the author dropdown)
https://user-images.githubusercontent.com/17645053/229422229-98aa9656-3439-4f8c-9f4e-83bd8e2a2557.mov
Possible improvements can be made, which will take 2 steps (Thanks to
@wolfogre for advice):
Step 1：
Backend: Add a new api, which returns a limit of 30 posters with matched
prefix.
Frontend: Change the search behavior from frontend search(fomantic
search) to backend search(when input is changed, send a request to get
authors matching the current search prefix)
Step 2：
Backend: Optimize the api in step 1 using indexer to support fuzzy
search.
This PR is implements the first step. The main changes:
1. Added api: `GET /{type:issues|pulls}/posters` , which return a limit
of 30 users with matched prefix (prefix sent as query). If
`DEFAULT_SHOW_FULL_NAME` in `custom/conf/app.ini` is set to true, will
also include fullnames fuzzy search.
2. Added a tooltip saying "Shows a maximum of 30 users" to the author
search dropdown
3. Change the search behavior from frontend search to backend search
After:
https://user-images.githubusercontent.com/17645053/229430960-f88fafd8-fd5d-4f84-9df2-2677539d5d08.mov
Fixes: https://github.com/go-gitea/gitea/issues/22586
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Although it seems that some different purposes are mixed in this PR,
however, they are all related, and can be tested together, so I put them
together to save everyone's time.
Diff: `+79 −84`, everything becomes much better.
### Improve the dropdown settings.
Move all fomantic-init related code into our `fomantic.js`
Fine-tune some dropdown global settings, see the comments.
Also help to fix the first problem in #23625 , cc: @yp05327
The "language" menu has been simplified, and it works with small-height
window better.
### Use SVG instead of `<i class="delete icon">`
It's also done by `$.fn.dropdown.settings.templates.label` , cc:
@silverwind
### Remove incorrect `tabable` CSS class
It doesn't have CSS styles, and it was only in Vue. So it's totally
unnecessary, remove it by the way.
### Improve the Repo Topic Edit form
* Simplify the code
* Add a "Cancel" button
* Align elements
Before:
<details>
</details>
After:
## TLDR
* Improve performance: lazy creating the tippy instances.
* Transparently support all "tooltip" elements, no need to call
`initTooltip` again and again.
* Fix a temporary tooltip re-entrance bug, which causes showing temp
content forever.
* Upgrade vue3-calendar-heatmap to 2.0.2 with lazy tippy init
(initHeatmap time decreases from 100ms to 50ms)
## Details
### The performance
Creating a lot of tippy tooltip instances is expensive. This PR doesn't
create all tippy tooltip instances, instead, it only adds "mouseover"
event listener to necessary elements, and then switches to the tippy
tooltip
### The general approach for all tooltips
Before, dynamically generated tooltips need to be called with
`initTooltip`.
After, use MutationObserver to:
* Attach the event listeners to newly created tooltip elements, work for
Vue (easier than before)
* Catch changed attributes and update the tooltip content (better than
before)
It does help a lot, eg:
1a4efa0ee9/web_src/js/components/PullRequestMergeForm.vue (L33-L36)
### Temporary tooltip re-entrance bug
To reproduce, on try.gitea.io, click the "copy clone url" quickly, then
the tooltip will be "Copied!" forever.
After this PR, with the help of `attachTippyTooltip`, the tooltip
content could be reset to the default correctly.
### Other changes
* `data-tooltip-content` is preferred from now on, the old
`data-content` may cause conflicts with other modules.
* `data-placement` was only used for tooltip, so it's renamed to
`data-tooltip-placement`, and removed from `createTippy`.
This PR follows #22599 and #23450
The major improvements:
1. The `aria-*.js` are totally transparent now, no need to call
`attachDropdownAria` explicitly anymore.
* It hooks the `$.fn.checkbox` and `$.fn.dropdown`, then our patch
works.
* It makes all dynamically generated checkbox/dropdown work with a11y
without any change
* eg: the `conversation.find('.dropdown').dropdown();` in `repo-diff.js`
2. Since it's totally transparent now, it could be easier to modify or
remove in the future.
3. It handles all selection labels as well (by onLabelCreate), so it
supports "multiple selection dropdown" now.
* It partially completes one of my TODOs: `TODO: multiple selection is
not supported yet.`
4. The code structure is clearer, code blocks are splitted into
different functions.
* The old `attachOneDropdownAria` was splitted into separate functions.
* It makes it easier to add more fine tunes in the future, and co-work
with contributors.
6. The code logic is similar as before, only two new parts:
1. the `ariaCheckboxFn` and `ariaDropdownFn` functions
2. the `onLabelCreate` and `updateSelectionLabel` functions
In `aria-dropdown.js` I had to mix jQuery and Vanilla JS somewhat, I
think the code is still understandable, otherwise the code would be much
more complex to read.
Thanks to fsologureng for the idea about "improving the 'delete icon'
with aria attributes".
If there is anything unclear or incorrect, feel free to ask and discuss,
or propose new PRs for it.
Added a new captcha(cloudflare turnstile) and its corresponding
document. Cloudflare turnstile official instructions are here:
https://developers.cloudflare.com/turnstile
Signed-off-by: ByLCY <bylcy@bylcy.dev>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
- Replace all default exports with named exports, except for Vue SFCs
- Remove names from Vue SFCs, they are automatically inferred from the
filename
- Misc whitespace-related tweaks
This PR adds a filetree to the left side of the files/diff view.
Initially the filetree will not be shown and may be shown via a new
"Show file tree" button.
Showing and hiding is using the same icon as github. Folders are
collapsible. On small devices (max-width 991 PX) the file tree will be
hidden.
Close#18192
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Prettify number of issues
- Use the PrettyNumber function to add commas in large amount of issues.
* Use client-side formatting
* prettify on both server and client
* remove unused i18n entries
* handle more cases, support other int types in PrettyNumber
* specify locale to avoid issues with node default locale
* remove superfluos argument
* introduce template helper, octicon tweaks, js refactor
* Update modules/templates/helper.go
* Apply some suggestions.
* Add comment
* Update templates/user/dashboard/issues.tmpl
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Adds a feature [like GitHub has](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request-from-a-fork) (step 7).
If you create a new PR from a forked repo, you can select (and change later, but only if you are the PR creator/poster) the "Allow edits from maintainers" option.
Then users with write access to the base branch get more permissions on this branch:
* use the update pull request button
* push directly from the command line (`git push`)
* edit/delete/upload files via web UI
* use related API endpoints
You can't merge PRs to this branch with this enabled, you'll need "full" code write permissions.
This feature has a pretty big impact on the permission system. I might forgot changing some things or didn't find security vulnerabilities. In this case, please leave a review or comment on this PR.
Closes#17728
Co-authored-by: 6543 <6543@obermui.de>
* Allow commit status popup on /pulls page
The /pulls page doesn't contain a "repository" element, so the early-out here was preventing the commit status popup hook from working. However, the only thing the .repository element is being used for here is determining whether the popup should be on the right or on the left, so we don't actually need the element to exist for the hook to work.
Pull request #19375 allows the statuses on /pulls pages to appear clickable, but this commit is required to make the popup actually work there.
* Move commit statuses popup hook to dedicated func
* Add missing import
* ROOT_URL issues: some users did wrong to there app.ini config, then:
* The assets can not be loaded (AppSubUrl != "" and users try to access http://host:3000/)
*The ROOT_URL is wrong, then many URLs in Gitea are broken.
Now Gitea show enough information to users.
* JavaScript error issues, there are many users affected by JavaScript errors, some are caused by frontend bugs, some are caused by broken customized templates. If these JS errors can be found at first time, then maintainers do not need to ask about how bug occurs again and again.
* Some people like to modify the `head.tmpl`, so we separate the script part to `head_script.tmpl`, then it's much safer.
* use specialized CSS class "js-global-error", end users still have a chance to hide error messages by customized CSS styles.
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR makes sure that direct matches in the user search always show on top of the result list.
The following places were checked to follow the desired behavior now:
- Search when adding a user to a team
- Search when adding a user as a collaborator to a repository
Signed-off-by: Maximilian Weiler <16721506+maweil@users.noreply.github.com>
It makes Admin's life easier to filter users by various status.
* introduce window.config.PageData to pass template data to javascript module and small refactor
move legacy window.ActivityTopAuthors to window.config.PageData.ActivityTopAuthors
make HTML structure more IDE-friendly in footer.tmpl and head.tmpl
remove incorrect <style class="list-search-style"></style> in head.tmpl
use log.Error instead of log.Critical in admin user search
* use LEFT JOIN instead of SubQuery when admin filters users by 2fa. revert non-en locale.
* use OptionalBool instead of status map
* refactor SearchUserOptions.toConds to SearchUserOptions.toSearchQueryBase
* add unit test for user search
* only allow admin to use filters to search users
* issue content history
* Use timeutil.TimeStampNow() for content history time instead of issue/comment.UpdatedUnix (which are not updated in time)
* i18n for frontend
* refactor
* clean up
* fix refactor
* re-format
* temp refactor
* follow db refactor
* rename IssueContentHistory to ContentHistory, remove empty model tags
* fix html
* use avatar refactor to generate avatar url
* add unit test, keep at most 20 history revisions.
* re-format
* syntax nit
* Add issue content history table
* Update models/migrations/v197.go
Co-authored-by: 6543 <6543@obermui.de>
* fix merge
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
One of the biggest reasons for slow repository browsing is that we wait
until last commit information has been generated for all files in the
repository.
This PR proposes deferring this generation to a new POST endpoint that
does the look up outside of the main page request.
Signed-off-by: Andrew Thornton <art27@cantab.net>
