(cherry picked from commit f8ab9dafb7a173a35e9308f8f784735b0f822439)
Conflicts:
routers/web/repo/fork.go
trivial context conflict, the file does not exist in Forgejo
Fix#28761Fix#27884Fix#28093
## Changes
### Rerun all jobs
When rerun all jobs, status of the jobs with `needs` will be set to
`blocked` instead of `waiting`. Therefore, these jobs will not run until
the required jobs are completed.
### Rerun a single job
When a single job is rerun, its dependents should also be rerun, just
like GitHub does
(https://github.com/go-gitea/gitea/issues/28761#issuecomment-2008620820).
In this case, only the specified job will be set to `waiting`, its
dependents will be set to `blocked` to wait the job.
### Show warning if every job has `needs`
If every job in a workflow has `needs`, all jobs will be blocked and no
job can be run. So I add a warning message.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/88f43511-2360-465d-be96-ee92b57ff67b"
width="480px" />
(cherry picked from commit 2f060c5834d81f0317c795fc281f9a07e03e5962)
This PR will avoid load pullrequest.Issue twice in pull request list
page. It will reduce x times database queries for those WIP pull
requests.
Partially fix#29585
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 62f8174aa2fae1481c7e17a6afcb731a5b178cd0)
Conflicts:
models/activities/notification_list.go
moved to models/activities/notification.go
The error message:
`editor.file_changed_while_editing = The file contents have changed
since you started editing. <a target="_blank" rel="noopener noreferrer"
href="%s">Click here</a> to see them or <strong>Commit Changes
again</strong> to overwrite them.`
Is re-used in inappropriate contexts. The link in the key goes to a 404
when the key is used in a situation where the file contents have not
changed.
Added two new keys to differentiate commit id mismatch and push out of
date conditions.
(cherry picked from commit 16e360099d0a515d429538ec88cff1f3ede23fb4)
- If a branch cannot be renamed due to a protected branch rule, show
this error in the UI instead of throwing an internal server error.
- Add integration test (also simplify the existing one).
- Resolves#2751
Fix#28157
This PR fix the possible bugs about actions schedule.
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
(cherry picked from commit 97292da960)
Conflicts:
modules/actions/github.go
routers/web/repo/setting/default_branch.go
routers/web/repo/setting/setting.go
services/repository/branch.go
services/repository/setting.go
tests/integration/actions_trigger_test.go
Repositories displaying an "Add more..." tab on the header is a neat way
to let people discover they can enable more units. However, displaying
it all the time for repository owners, even when they deliberately do
not want to enable more units gets noisy very fast.
As such, this patch introduces a new setting which lets people disable
this hint under the appearance settings.
Fixes#2378.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
shields.io uses dashes to separate parts of the badge it needs to
return. If our label or text parts contain dashes, we need to encode
those for shields.io to recognise what we want it to do, and to have the
correct text on the badge, too.
Fortunately, this is as simple as replacing all dashes with double
dashes in both the label and the text parts. We do not need to do the
same for the color, because that part is not user controlled.
This fixes the badges for cases when a workflow name includes dashes, or
when a release's tag name does.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- Currently in the Cargo section of the packages setting menu two
buttons are always shown, "Initalize index" and "Rebuild index", however
only of these should be shown depending on the state of the index, if
there's no index the "Initalize index" button should be shown and if
there's an index the "Rebuild index" button should be shown. This patch
does exactly that.
- Resolves#2628
This PR do some loading speed optimization for feeds user interface
pages.
- Load action users batchly but not one by one.
- Load action repositories batchly but not one by one.
- Load action's Repo Owners batchly but not one by one.
- Load action's possible issues batchly but not one by one.
- Load action's possible comments batchly but not one by one.
(cherry picked from commit aed3b53abdd02a3ffbf9e8eb90272ff567333073)
It's unnecessary to detect the repository object format from git
repository. Just use the repository's object format name.
(cherry picked from commit 3c6fc25a77c37d50686caa495d27a31dcef7f75f)
Conflicts:
services/pull/pull.go
The `reloadParam` function already calls `context.UserAssignmentWeb`
with the same parameters, there's no need to do it again.
Change cherry picked from gitea#29751.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
meilisearch does not have an search option to contorl fuzzynes per query
right now:
- https://github.com/meilisearch/meilisearch/issues/1192
- https://github.com/orgs/meilisearch/discussions/377
- https://github.com/meilisearch/meilisearch/discussions/1096
so we have to create a workaround by post-filter the search result in
gitea until this is addressed.
For future works I added an option in backend only atm, to enable
fuzzynes for issue indexer too.
And also refactored the code so the fuzzy option is equal in logic to
code indexer
---
*Sponsored by Kithara Software GmbH*
Conflicts:
routers/web/repo/search.go
trivial context confict s/isMatch/isFuzzy/
(cherry picked from commit 25b842df261452a29570ba89ffc3a4842d73f68c)
Conflicts:
routers/web/repo/wiki.go
services/repository/branch.go
services/repository/migrate.go
services/wiki/wiki.go
also apply to Forgejo specific usage of the refactored functions
After repository commit status has been introduced on dashaboard, the
most top SQL comes from `GetLatestCommitStatusForPairs`.
This PR adds a cache for the repository's default branch's latest
combined commit status. When a new commit status updated, the cache will
be marked as invalid.
<img width="998" alt="image"
src="https://github.com/go-gitea/gitea/assets/81045/76759de7-3a83-4d54-8571-278f5422aed3">
(cherry picked from commit e308d25f1b2fe24b4735432b05e5e221879a2705)
Detect broken git hooks by checking if the commit id of branches in DB
is the same with the git repo.
It can help #29338#28277 and maybe more issues.
Users could complain about actions, webhooks, and activities not
working, but they were not aware that it is caused by broken git hooks
unless they could see a warning.
<img width="1348" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2b92a46d-7f1d-4115-bef4-9f970bd695da">
It should be merged after #29493. Otherwise, users could see a ephemeral
warning after committing and opening the repo home page immediately.
And it also waits for #29495, since the doc link (the anchor part) will
be updated.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit a4bcfb8ef1d5b2b522f78c9560d53ddbdbb02218)
Follow #29522
Administrators should be able to set a user's email address even if the
email address is not in `EMAIL_DOMAIN_ALLOWLIST`
(cherry picked from commit 136dd99e86eea9c8bfe61b972a12b395655171e8)
Fix#27457
Administrators should be able to manually create any user even if the
user's email address is not in `EMAIL_DOMAIN_ALLOWLIST`.
(cherry picked from commit 4fd9c56ed09b31e2f6164a5f534a31c6624d0478)
Fix#29533, and add some tests for "base/paginate.tmpl"
(cherry picked from commit 8553b4600e3035b6f6ad6907c37cebd013fa4d64)
Conflicts:
services/contexttest/context_tests.go
trivial conflict because
"Improve user experience for outdated comments" was skipped
Before this change, if we had more than 200 entries being deferred in
loading, the entire table would get replaced thus losing any event
listeners attached to the elements within the table, such as the elipsis
button and commit list with tippy.
With this change we remove the previous javascript code that replaced
the table and use htmx to replace the table.
htmx attributes added:
- `hx-indicator="tr.notready td.message span"`: attach the loading
spinner to the files whose last commit is still being loaded
- `hx-trigger="load"` trigger the request-replace behavior as soon as
possible
- `hx-swap="morph"`: use the idiomorph morphing algorithm, this is the
thing that makes it so the elipsis button event listener is kept during
the replacement, fixing the bug because we don't actually replace the
table, only modifying it
- `hx-post="{{.LastCommitLoaderURL}}"`: make a post request to this url
to get the table with all of the commit information
As part of this change I removed the handling of partial replacement in
the case we have less than 200 "not ready" files. The first reason is
that I couldn't make htmx replace only a subset of returned elements,
the second reason is that we have a cache implemented in the backend
already so the only cost added is that we query the cache a few times
(which is sure to be populated due to the initial request), and the last
reason is that since the last refactor of this functionality that
removed jQuery we don't properly send the "not ready" entries as the
backend expects `FormData` with `f[]` and we send a JSON with `f` so we
always query for all rows anyway.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 937e8b55149388840bbf6c4d7216495bc3dd2fe9)
Add two "HTMLURL" methods for PackageDescriptor.
And rename "FullWebLink" to "VersionWebLink"
(cherry picked from commit bf6502a8f7a2e9a2b64b43b7733316d863c9a768)
Fixes#28853
Needs both https://gitea.com/gitea/act_runner/pulls/473 and
https://gitea.com/gitea/act_runner/pulls/471 on the runner side and
patched `actions/upload-artifact@v4` / `actions/download-artifact@v4`,
like `christopherhx/gitea-upload-artifact@v4` and
`christopherhx/gitea-download-artifact@v4`, to not return errors due to
GHES not beeing supported yet.
(cherry picked from commit a53d268aca87a281aadc2246541f8749eddcebed)
Str2html was abused a lot. So use a proper name for it: SanitizeHTML
And add some tests to show its behavior.
(cherry picked from commit fb42972c057364a1dc99dfb528554e7a94415be7)
Conflicts:
docs/content/administration/mail-templates.en-us.md
docs/content/administration/mail-templates.zh-cn.md
prefer their version always
This PR touches the most interesting part of the "template refactoring".
1. Unclear variable type. Especially for "web/feed/convert.go":
sometimes it uses text, sometimes it uses HTML.
2. Assign text content to "RenderedContent" field, for example: `
project.RenderedContent = project.Description` in web/org/projects.go
3. Assign rendered content to text field, for example: `r.Note =
rendered content` in web/repo/release.go
4. (possible) Incorrectly calling `{{Str2html
.PackageDescriptor.Metadata.ReleaseNotes}}` in
package/content/nuget.tmpl, I guess the name Str2html misleads
developers to use it to "render string to html", but it only sanitizes.
if ReleaseNotes really contains HTML, then this is not a problem.
(cherry picked from commit e71eb8930a5d0f60874b038c223498b41ad65592)
Conflicts:
modules/templates/util_string.go
trivial context conflict
just some refactoring bits towards replacing **util.OptionalBool** with
**optional.Option[bool]**
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
(cherry picked from commit f6656181e4a07d6c415927220efa2077d509f7c6)
Conflicts:
models/repo/repo_list_test.go
trivial shared fixture count conflicts
just some refactoring bits towards replacing **util.OptionalBool** with
**optional.Option[bool]**
(cherry picked from commit 274c0aea2e88db9bc41690c90e13e8aedf6193d4)
Thanks to inferenceus : some sort orders on the "explore/users" page
could list users by their lastlogintime/updatetime.
It leaks user's activity unintentionally. This PR makes that page only
use "supported" sort orders.
Removing the "sort orders" could also be a good solution, while IMO at
the moment keeping the "create time" and "name" orders is also fine, in
case some users would like to find a target user in the search result,
the "sort order" might help.
(cherry picked from commit eedb8f41297c343d6073a7bab46e4df6ee297a90)
Previously, it will be treated as "re-run all jobs" when `jobIndex ==
0`. So when you click re-run button on the first job, it triggers all
the jobs actually.
(cherry picked from commit bad4ad70181c747599e206c0e7a87b57c997385d)
Since `modules/context` has to depend on `models` and many other
packages, it should be moved from `modules/context` to
`services/context` according to design principles. There is no logic
code change on this PR, only move packages.
- Move `code.gitea.io/gitea/modules/context` to
`code.gitea.io/gitea/services/context`
- Move `code.gitea.io/gitea/modules/contexttest` to
`code.gitea.io/gitea/services/contexttest` because of depending on
context
- Move `code.gitea.io/gitea/modules/upload` to
`code.gitea.io/gitea/services/context/upload` because of depending on
context
(cherry picked from commit 29f149bd9f517225a3c9f1ca3fb0a7b5325af696)
Conflicts:
routers/api/packages/alpine/alpine.go
routers/api/v1/repo/issue_reaction.go
routers/install/install.go
routers/web/admin/config.go
routers/web/passkey.go
routers/web/repo/search.go
routers/web/repo/setting/default_branch.go
routers/web/user/home.go
routers/web/user/profile.go
tests/integration/editor_test.go
tests/integration/integration_test.go
tests/integration/mirror_push_test.go
trivial context conflicts
also modified all other occurrences in Forgejo specific files
- When a user goes opens a symlink file in Forgejo, the file would be
rendered with the path of the symlink as content.
- Add a button that is shown when the user opens a *valid* symlink file,
which means that the symlink must have an valid path to an existent
file and after 999 follows isn't a symlink anymore.
- Return the relative path from the `FollowLink` functions, because Git
really doesn't want to tell where an file is located based on the blob ID.
- Adds integration tests.
- Implement the commit mail selection feature for the other supported
Git operations that can be done trough the web UI.
- Adds integration tests (goodluck reviewing this).
- Ref: #1788
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
The `repo.SingleRelease` handler was broken by gitea#29149, as the
switch to `getReleaseInfos` stopped returning tags without an associated
release. This resulted in the web UI showing a 404 when trying to view a
tag without a release.
This restores the functionality by explicitly including tags in the
search, and also adds tests to exercise the fix.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
RenderEmojiPlain(emoji.ReplaceAliases) should be called explicitly for
some contents, but not for everything.
Actually in modern days, in most cases it doesn't need such
"ReplaceAliases". So only keep it for issue/PR titles.
If anyone really needs to do ReplaceAliases for some contents, I will
propose a following fix.
(cherry picked from commit 10c7996b5a5c705964fc6cc9c1817eea1fc436ef)
Conflicts:
templates/base/head.tmpl
context
Fix#14459
The following users can add/remove review requests of a PR
- the poster of the PR
- the owner or collaborators of the repository
- members with read permission on the pull requests unit
(cherry picked from commit c42083a33950be6ee9f822c6d0de3c3a79d1f51b)
Conflicts:
models/repo/repo_list_test.go
tests/integration/api_nodeinfo_test.go
tests/integration/api_repo_test.go
shared fixture counts
This is the implementation of Recent Commits page. This feature was
mentioned on #18262.
It adds another tab to Activity page called Recent Commits. Recent
Commits tab shows number of commits since last year for the repository.
(cherry picked from commit d3982bcd814bac93e3cbce1c7eb749b17e413fbd)
Now we can get object format name from git command line or from the
database repository table. Assume the column is right, we don't need to
read from git command line every time.
This also fixed a possible bug that the object format is wrong when
migrating a sha256 repository from external.
<img width="658" alt="image"
src="https://github.com/go-gitea/gitea/assets/81045/6e9a9dcf-13bf-4267-928b-6bf2c2560423">
(cherry picked from commit b79c30435f439af8243ee281310258cdf141e27b)
Conflicts:
routers/web/repo/blame.go
services/agit/agit.go
context
### Overview
This is the implementation of Code Frequency page. This feature was
mentioned on these issues: #18262, #7392.
It adds another tab to Activity page called Code Frequency. Code
Frequency tab shows additions and deletions over time since the
repository existed.
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/2603504f-aee7-4929-a8c4-fb3412a7a0f6">
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/58c03721-729f-4536-a663-9f337f240963">
---
#### Features
- See additions deletions over time since repository existed
- Click on "Additions" or "Deletions" legend to show only one type of
contribution
- Use the same cache from Contributors page so that the loading of data
will be fast once it is cached by visiting either one of the pages
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 875f5ea6d83c8371f309df99654ca3556623004c)
Extract from #20549
This PR added a new option on app.ini `[admin]USER_DISABLED_FEATURES` to
allow the site administrator to disable users visiting deletion user
interface or allow.
This options are also potentially allowed to define more features in
future PRs.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 3ef6252e06a1f3981f8b7d1717bfc581418b1dc5)
Conflicts:
custom/conf/app.example.ini
docs/content/administration/config-cheat-sheet.en-us.md
modules/setting/admin.go
context
Similarly to how `[repository].DISABLE_FORKS` works, lets make
`[repository].DISABLE_STARS` disable the routes too, not just hide the
functionality from the UI.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Split up `repo.Action` in `routers/web` into smaller functions.
While some of the functionality was very similar (starring / watching),
they are ultimately separate actions. Rather than collecting all of them
under a single handler (`repo.Action`), split them up into smaller,
independent functions.
This does result in a little bit of code duplication, but the
independent functions should be easier to follow and understand.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "desc" action has not been used since at least 2016, probably much
earlier. It's an ancient Gogs artifact - drop it.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- If a user tries to create another protected branching rule that
specifies a set of branches already used by another rule, do not allow
it.
- Update the translation accordingly.
- Adds integration test.
- Resolves#2455
For small, personal self-hosted instances with no user signups, the fork
button is just a noise. This patch allows disabling them like stars can
be disabled too.
Disabling forks does not only remove the buttons from the web UI, it
also disables the routes that could be used to create forks.
Fixes#2441.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
As suggested by @Gusted in #2431, move the permission checking from
`ArtifactsDeleteView` into the route instead, where it belongs.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
- Instead of relying on JSON to convert the struct to map, use
`reflect` to do this conversion. Also simplify it a bit by only passing
one variable to the template.
- This avoids issues where the conversion to JSON causes changes in
the value, for example huge numbers are converted to its scientific
notation but are consequently not converted back when being displayed.
- Adds unit tests.
- Resolves an issue where the amount of comments is being displayed in
scientific notation on Codeberg.
Follow #29165.
* Introduce JSONTemplate to help to render JSON templates
* Introduce JSEscapeSafe for templates. Now only use `{{ ... |
JSEscape}}` instead of `{{ ... | JSEscape | Safe}}`
* Simplify "UserLocationMapURL" useage
(cherry picked from commit 31bb9f3247388b993c61a10190cfd512408ce57e)
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
- following organization is broken from #28908
- add login check for the follow button in organization profile page
(cherry picked from commit 68227996a7a84a240b36c304d04c5c8d82948df8)
- Refactor the system status list into its own template
- Change the backend to return only the system status if htmx initiated
the request
- `hx-get="{{$.Link}}/system_status`: reuse the backend handler
- `hx-swap="innerHTML"`: replace the `<div>`'s innerHTML (essentially
the new template)
- `hx-trigger="every 5s"`: call every 5 seconds
- `hx-indicator=".divider"`: the `is-loading` class shouldn't be added
to the div during the request, so set it on an element it has no effect
on
- Render "Since Last GC Time" with `<relative-time>`, so we send a
timestamp
# Auto-update in action GIF
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c70f65e83bc1876fb368fd117d342573ff18a9e8)
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes#847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves#2321
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
Use `ctx.ServerError` instead of a separate `log.Error` + `ctx.Error`.
`ctx.ServerError` does essentially the same thing, but better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
`ctx.Error` only displays the text but `ctx.ServerError` renders the
usual error page.
(cherry picked from commit da2f03750f9672c5aac48209539874f2af2673f1)
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes#2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "Self Check" menu essentially runs the collation check that is also
performed at startup, and displays the results. This is only a thing for
MariaDB/MySQL and MSSQL. As such, the menu item should only be available
for these database types.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 0ca118fdc3)
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
- Remove unnecessary checks for `ctx.Repo.TreePath`, because it will
already early-return if it's empty.
- Simplify `performBlame` to extract the repoPath from the context.
- Don't render the topics, as they are not shown in the blame
page (there's a condition in the template for the blame page).
- Fix that `performBlame` doesn't call `NotFound`, it should instead
only return the error.
- Fix that the error handlings call `ServerError` instead of `NotFound`.
- Simplify `bypass-blame-ignore` to use `ctx.FormBool`.
- Remove `TreeLink`, `HasParentPath` and `ParentPath` as it's not used
in the blame template.
- Inline `BranchLink` and `RawFileLink` string operations.
- Move around `NumLines` to make it clear the error is handled.
- Less code, less things the code does, more readable and thus more
maintanable!
(cherry picked from commit e02baca55c)
(cherry picked from commit 74e00620ca)
When displaying the recently pushed branches banner, don't display
branches that have no common history with the default branch. These
branches are usually not meant to be merged, so the banner is just noise
in this case.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2196
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e1fba517f4)
(cherry picked from commit 2d3c81d4f2)
(cherry picked from commit 624a61b3b8)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d)
(cherry picked from commit 70c5e2021d)
(cherry picked from commit 48b25be67a)
- It's possible that `canSoftDeleteContentHistory` is called without
`ctx.Doer` being set, such as an anonymous user requesting the
`/content-history/detail` endpoint.
- Add a simple condition to always set to `canSoftDelete` to false if an
anonymous user is requesting this, this avoids a panic in the code that
assumes `ctx.Doer` is set.
- Added integration testing.
(cherry picked from commit 0b5db0dcc6)
(cherry picked from commit 30d168bcc8)
(cherry picked from commit 19be82b7ef)
(cherry picked from commit 334b703b17)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce222)
(cherry picked from commit f09f6e029b)
(cherry picked from commit 2f8b041489)
(cherry picked from commit d3186ee5f4)
When trying to find a `README.md` in a `.profile` repo, do so case
insensitively. This change does not make it possible to render readmes
in formats other than Markdown, it just removes the hard-coded
"README.md".
Also adds a few tests to make sure the change works.
Fixes#1494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit edd219d8e9)
(cherry picked from commit 2c0105ef17)
(cherry picked from commit 3975a9f3aa)
(cherry picked from commit dee4a18423)
(cherry picked from commit 60aee6370f)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes#126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212)
(cherry picked from commit 20d14f7844)
(cherry picked from commit 4359741431)
(cherry picked from commit 35cff45eb8)
(cherry picked from commit 2fc0d0b8a3)
When displaying the repo home view, do not redirect to unit types that
can't be defaults (which, at the moment, are the external wiki and issue
tracker unit types).
If we'd redirect to those, that would mean that a repository with the
Code unit disabled, and an external issue tracker would immediately
redirect to the external issue tracker, making it harder to reach other,
non-external units of the repo.
Fixes#1965.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 44078e5460)
(cherry picked from commit 1868dec2e4)
(cherry picked from commit c3a8e98870)
(cherry picked from commit 9266b1916f)
(cherry picked from commit 8fa5ff65af)
- The endpoint was moved from being an API endpoint to an web endpoint
with JSON result. However the API context isn't the same as the web
context, for example the `ctx.Error` only takes in the first two
arguments into consideration and doesn't do logging, which is not the
same behavior as the API context where there's three arguments and does
do logging and only reveal the function + error if the user is admin.
- Remove any details in the error message and do the logging seperatly,
this is somewhat consistent with how other API endpoints behave.
- Ref: https://codeberg.org/forgejo/forgejo/issues/1998
(cherry picked from commit fe71e32ace)
(cherry picked from commit c89e0735fa)
(cherry picked from commit 4c04dcfc59)
(cherry picked from commit 66eae1041c)
(cherry picked from commit 7b70fa9392)
(cherry picked from commit abf64ca0e3)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
FixesCodeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b74439922)
(cherry picked from commit 337cf62c10)
(cherry picked from commit b6786fdb32)
(cherry picked from commit a5d2829a10)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72e)
(cherry picked from commit 42c55e494e)
(cherry picked from commit e3463bda47)
- When the user is not found in `reloadparam`, early return when the
user is not found to avoid calling `IsUserVisibleToViewer` which in turn
avoids causing a NPE.
- This fixes the case that a 500 error and 404 error is shown on the
same page.
- Add integration test for non-existant user RSS.
- Regression by c6366089df
(cherry picked from commit f0e0696278)
(cherry picked from commit 75d8066908)
(cherry picked from commit 4d0a1e0637)
(cherry picked from commit 5f40a485da)
(cherry picked from commit c4cb7812e3)
(cherry picked from commit d31ce2f03d)
(cherry picked from commit cfebef4f82)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
(cherry picked from commit cad9184a36)
(cherry picked from commit e2da5d7fe1)
(cherry picked from commit 3a80534d4d)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da563)
(cherry picked from commit f7535a1cef)
(cherry picked from commit 1a90cd37c3)
(cherry picked from commit d86d71340a)
(cherry picked from commit 9e5cce1afc)
(cherry picked from commit 2013fb3fab)
(cherry picked from commit 88b9d21d11)
(cherry picked from commit 72c020298e)
(cherry picked from commit 6525f730df)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
(cherry picked from commit 49c39f0ed5)
(cherry picked from commit a8f9727388)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384)
(cherry picked from commit 9b9aca2a02)
(cherry picked from commit 0d0ab1af1f)
(cherry picked from commit d3b352c854)
(cherry picked from commit d6af2094df)
(cherry picked from commit f96e55a7a9)
(cherry picked from commit bb6261f847)
(cherry picked from commit f6a4146161)
(cherry picked from commit ed02921379)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 768377cb02)
(cherry picked from commit 2cebe3ef94)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a4)
(cherry picked from commit c58566403d)
(cherry picked from commit b8b3f6ab8b)
(cherry picked from commit 195520100b)
(cherry picked from commit 6e417087dd)
(cherry picked from commit ff91e5957a)
(cherry picked from commit 6626d5cc75)
(cherry picked from commit 62f8ab793b)
(cherry picked from commit e5bbf1a2d0)
(cherry picked from commit f5b8c8edea)
(cherry picked from commit 50948fa11b)
(cherry picked from commit 83a9f7f442)
(cherry picked from commit 679438b5d6)
(cherry picked from commit 17db07d6d0)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
(cherry picked from commit 7f12610ff6)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5)
(cherry picked from commit 64bd374803)
(cherry picked from commit 63d086f666)
(cherry picked from commit 3cd48ef4d5)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed6)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59)
(cherry picked from commit 6e3c0be555)
As the docs of codeberg refer to the strings printed by the Forgejo
ssh servers, this is user-facing and is nice to update to the new
product name.
(cherry picked from commit 103991d73f)
(cherry picked from commit 2a0d3f85f1)
(cherry picked from commit eb2b4ce388)
(cherry picked from commit 0998b51716)
[BRANDING] forgejo log message
(cherry picked from commit d51a046ebe)
(cherry picked from commit d66e1c7b6e)
(cherry picked from commit b5bffe4ce8)
(cherry picked from commit 3fa776d856)
(cherry picked from commit 18d064f472)
(cherry picked from commit c95094e355)
(cherry picked from commit 5784290bc4)
(cherry picked from commit aee336886b)
(cherry picked from commit ec2f60b516)
(cherry picked from commit 7af742a284)
(cherry picked from commit f279e2a264)
(cherry picked from commit fd38cfb14e)
(cherry picked from commit 64c8226618)
(cherry picked from commit b546fb2304)
(cherry picked from commit ad10202177)
(cherry picked from commit c89cab9c2b)
(cherry picked from commit 9579322ec2)
(cherry picked from commit 16b44ad18d)
(cherry picked from commit 2571ff703b)
(cherry picked from commit ad61d9ce9b)
(cherry picked from commit 9b2c45d4d3)
(cherry picked from commit ed01b79a59)
(cherry picked from commit d040b66427)
(cherry picked from commit ffe0bbea48)
(cherry picked from commit 4c1b2c409b)
(cherry picked from commit 3d8338ed10)
(cherry picked from commit a92f044ea9)
[BRANDING] link to forgejo.org/docs instead of docs.gitea.io
(cherry picked from commit 3efafd0e08)
(cherry picked from commit 148185e34b)
(cherry picked from commit 834e264698)
(cherry picked from commit e72fa6eb1e)
[BRANDING] link to forgejo.org/docs instead of docs.gitea.io
Fix the link that was 404.
(cherry picked from commit ae515d7258)
(cherry picked from commit facc2367f0)
(cherry picked from commit 25784b9f21)
(cherry picked from commit 2efc6138d9)
(cherry picked from commit b9d0871631)
(cherry picked from commit f0446e51b9)
(cherry picked from commit 1638aa67fb)
(cherry picked from commit 290db6a018)
(cherry picked from commit 89b87cf542)
(cherry picked from commit 656ed94962)
(cherry picked from commit 036f879f96)
(cherry picked from commit 69eea35f81)
(cherry picked from commit b72e3f4a92)
(cherry picked from commit af606b8574)
(cherry picked from commit 7e47f8135c)
(cherry picked from commit 0e5218cc53)
(cherry picked from commit 7c2a20a528)
(cherry picked from commit 4e94006363)
(cherry picked from commit e47cdfc43f)
(cherry picked from commit 1dcb3e1da4)
(cherry picked from commit 67367c4e0f)
(cherry picked from commit 252087d1ff)
(cherry picked from commit f5977a43e5)
Conflicts:
templates/base/head_navbar.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 594938eb15)
(cherry picked from commit 0257d038a7)
(cherry picked from commit 72821dd140)
[BRANDING] s/gitea/forgejo/ in HTML placeholders
Replaced Gitea branding with Forgejo for input placeholders
Closes: #686
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/752
(cherry picked from commit 6160d37ca9)
(cherry picked from commit df61138c7e)
(cherry picked from commit 1f30566c3f)
(cherry picked from commit 539bb825f5)
(cherry picked from commit bee0f66c86)
(cherry picked from commit 60ad005c95)
(cherry picked from commit 282e26222e)
(cherry picked from commit f9ca551f3d)
(cherry picked from commit b2e04b04c3)
(cherry picked from commit c8f395a03c)
(cherry picked from commit 0d58ce49ae)
(cherry picked from commit c602ddf91e)
(cherry picked from commit 029e37271e)
(cherry picked from commit fdaa96b3cc)
(cherry picked from commit 515d99e27d)
(cherry picked from commit da73274ba1)
(cherry picked from commit ce90b696a0)
(cherry picked from commit b6bf98763b)
(cherry picked from commit 5b380d22d7)
[BRANDING] How to start a runner: URL to Actions admin documentation
(cherry picked from commit da91799e6f)
(cherry picked from commit 28231663b6)
(cherry picked from commit 533a90345b)
(cherry picked from commit 6a0e4e55dd)
(cherry picked from commit f47cd611c6)
(cherry picked from commit 001264b784)
(cherry picked from commit e4099e9bb9)
(cherry picked from commit 3a1885649f)
(cherry picked from commit c42802c710)
(cherry picked from commit a611ce8d6d)
(cherry picked from commit a3d7d10a80)
(cherry picked from commit 52adde671f)
(cherry picked from commit c9a3820fef)
(cherry picked from commit dce40997c9)
(cherry picked from commit 312a6b92f3)
[BRANDING] package templates & links
- Change Gitea to Forgejo where necessary.
- Point all documentation to Forgejo's documentation.
- Resolves#992
(cherry picked from commit d0b78a6ede)
(cherry picked from commit e2382f30ba)
(cherry picked from commit c41cf05a33)
(cherry picked from commit 797e598ae7)
(cherry picked from commit 970031a1c2)
(cherry picked from commit 0c1180e2e1)
Conflicts:
templates/package/content/alpine.tmpl
templates/package/content/cargo.tmpl
templates/package/content/chef.tmpl
templates/package/content/composer.tmpl
templates/package/content/conan.tmpl
templates/package/content/conda.tmpl
templates/package/content/container.tmpl
templates/package/content/cran.tmpl
templates/package/content/debian.tmpl
templates/package/content/generic.tmpl
templates/package/content/go.tmpl
templates/package/content/helm.tmpl
templates/package/content/maven.tmpl
templates/package/content/npm.tmpl
templates/package/content/nuget.tmpl
templates/package/content/pub.tmpl
templates/package/content/pypi.tmpl
templates/package/content/rpm.tmpl
templates/package/content/rubygems.tmpl
templates/package/content/swift.tmpl
templates/package/content/vagrant.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 42ac9ff2ab)
(cherry picked from commit e390000bce)
(cherry picked from commit 56a437b29b)
Conflicts:
templates/package/content/cargo.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1466
[BRANDING] s/Gitea/Forgejo/ in user visible help & comments
- Modify the README of the docker directory to point to the relevant
docker files and documentation for Forgejo.
(cherry picked from commit aca6371215)
(cherry picked from commit 0ba96b1bc4)
(cherry picked from commit 5c8e6b53f1)
Conflicts:
docker/README.md
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit b3121c8004)
(cherry picked from commit 607f870416)
(cherry picked from commit 191d96afe4)
[BRANDING] healthcheck/check.go
(cherry picked from commit d703a236ce)
(cherry picked from commit d84ce3ff20)
(cherry picked from commit 2dbb844606)
(cherry picked from commit 14d3ae7e3a)
[BRANDING] s/Gitea/Forgejo/g in CLI output
(cherry picked from commit 7543c126bb)
(cherry picked from commit b66f422fc3)
(cherry picked from commit a81e4e46f3)
[BRANDING] Gitea->Forgejo in mailer code
(cherry picked from commit b91afea4ff)
(cherry picked from commit 5d7428167c)
(cherry picked from commit ed8101ba6c)
[BRANDING] use 'Forgejo' for Discord, Packagist, and Slack webhooks
Refs: https://codeberg.org/forgejo/forgejo/issues/1387
(cherry picked from commit 7dc3a05f5b)
(cherry picked from commit 133f2fc6cc)
[BRANDING] cmd/manager.go
(cherry picked from commit d1dba2c79d)
[BRANDING] pyproject.toml
(cherry picked from commit 7e8c868db2)
(cherry picked from commit 2395995c8b)
(cherry picked from commit dd6fbbf332)
Conflicts:
templates/package/content/cargo.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1548
(cherry picked from commit 6f9a5d5cab)
(cherry picked from commit d0635c4a07)
(cherry picked from commit 5f9a8c5744)
(cherry picked from commit 10b96c4567)
(cherry picked from commit 717d52e928)
(cherry picked from commit 5debdb103e)
(cherry picked from commit ded1c1700e)
(cherry picked from commit 52aa23cf7a)
(cherry picked from commit 882c942b06)
(cherry picked from commit 73fc2d2ea8)
Conflicts:
cmd/actions.go
cmd/doctor.go
cmd/keys.go
https://codeberg.org/forgejo/forgejo/pulls/1976
(cherry picked from commit 6180ef24dc)
(cherry picked from commit 8970fa2bf8)
Conflicts:
templates/package/content/debian.tmpl
https://codeberg.org/forgejo/forgejo/pulls/2074
Fix a typo in docker/README.md
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2e5df79dfb)
(cherry picked from commit 2bf6ce5b81)
(cherry picked from commit 8ec779277d)
(cherry picked from commit 6048fc66e8)
(cherry picked from commit 162538c722)
(cherry picked from commit 646bb99650)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f88)
(cherry picked from commit 7c07592d01)
(cherry picked from commit 78637af2b6)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd)
(cherry picked from commit 1963085dd9)
(cherry picked from commit fb94095d19)
(cherry picked from commit e1d1e46afe)
(cherry picked from commit 93993029e4)
(cherry picked from commit df3b058179)
(cherry picked from commit 8ccc6b9cba)
(cherry picked from commit 9fbe28fca3)
(cherry picked from commit 4ef2be6dc7)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3)
(cherry picked from commit 447009ff56)
(cherry picked from commit 72c0a6150a)
(cherry picked from commit 8ee9c070b9)
(cherry picked from commit 89aba06403)
(cherry picked from commit 798407599f)
(cherry picked from commit 41c9a2606b)
(cherry picked from commit a57b214e36)
(cherry picked from commit fd287a9134)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
(cherry picked from commit c73ac63696)
(cherry picked from commit 747a176048)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
(cherry picked from commit 20b5669269)
(cherry picked from commit 1574643a6a)
Update semantic version according to specification
(cherry picked from commit 22510f4130)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409)
(cherry picked from commit 5ea2309851)
(cherry picked from commit ec5217b9d1)
(cherry picked from commit 14f08e364b)
(cherry picked from commit b4465c67b8)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e6497)
(cherry picked from commit 532ec5d878)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f42)
(cherry picked from commit 1d928c3ab2)
(cherry picked from commit a39dc804cd)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3)
(cherry picked from commit 9b8d98475f)
(cherry picked from commit 2516103974)
(cherry picked from commit 18e6287963)
(cherry picked from commit e9694e67ab)
(cherry picked from commit a9763edaf0)
(cherry picked from commit e2b550f4fb)
(cherry picked from commit 2edac36701)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3)
(cherry picked from commit 578ccfdd27)
(cherry picked from commit 1bf6ac0952)
(cherry picked from commit 2fe16b2bfe)
(cherry picked from commit 7cd9d027ee)
(cherry picked from commit eaed4be2ae)
(cherry picked from commit cc94f3115f)
(cherry picked from commit d7a77e35cc)
(cherry picked from commit cd8eb68ab7)
(cherry picked from commit 68487ac95f)
(cherry picked from commit 616dceb565)
(cherry picked from commit 545fe5975b)
(cherry picked from commit c042cf8eda)
(cherry picked from commit ae5e5a7468)
(cherry picked from commit 8034ef5fa2)
(cherry picked from commit aaf0293034)
(cherry picked from commit daafa8ce58)
(cherry picked from commit 7ca3681d3e)
(cherry picked from commit 39f72cba71)
(cherry picked from commit 60a5917130)
(cherry picked from commit 4853bd9e16)
[API] Move forgejo api file (squash)
- Move the file to accommodate faa28b5a44
(cherry picked from commit bce89351d2)
(cherry picked from commit 11ae7f6e85)
(cherry picked from commit 25e96cfcb2)
(cherry picked from commit 6d8d19b391)
(cherry picked from commit 5afc5c454b)
(cherry picked from commit 86d07b4c24)
(cherry picked from commit e54d869fda)
(cherry picked from commit ab31ef1bba)
(cherry picked from commit 511cbca2f3)
(cherry picked from commit 333916fea8)
(cherry picked from commit 3802bcd7c9)
(cherry picked from commit 5d0fa034f7)
(cherry picked from commit d15627aa0d)
(cherry picked from commit ba0b21b930)
(cherry picked from commit 39ade66aac)
- The watch/unwatch button and star/unstar get their own template
- The backend returns HTML instead of redirect
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Follow #28654
The `comments` might be empty, so the templates shouldn't (and couldn't)
use it to render. When there is no comment, the UI should also be
updated to empty, so returning an empty body is good enough.
