* Delay printing hook statuses until after 1 second
* Move to a 5s delay, wrapped writer structure and add config
* Update cmd/hook.go
* Apply suggestions from code review
* Update cmd/hook.go
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
The minimum key size defaults weren't set as suggested in app.ini.sample
so if you enabled MINIMUM_KEY_SIZE_CHECK it would always fail since
there would be no matching values to check against. This pr adds the
default values that should have been there.
Should fix#9465
* Refactor
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add push-create to SSH serv
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Cannot push for another user unless admin
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Get owner in case admin pushes for another user
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Set new repo ID in result
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update to service and use new org perms
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Move pushCreateRepo to services
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Fix import order
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Changes for @guillep2k
* Check owner (not user) in SSH
* Add basic tests for created repos (private, not empty)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Default NO_REPLY_ADDRESS to DOMAIN
The default NO_REPLY_ADDRESS was previously noreply.example.org
This PR changes this to default to the default DOMAIN for gitea.
* Change default to noreply.%(DOMAIN)s
* Change default to "noreply" + Domain
* reject reactions wich ar not allowed
* dont duble check CreateReaction now throw ErrForbiddenIssueReaction
* add /repos/{owner}/{repo}/issues/comments/{id}/reactions endpoint
* add Find Functions
* fix some swagger stuff + add issue reaction endpoints + GET ReactionList now use FindReactions...
* explicite Issue Only Reaction for FindReactionsOptions with "-1" commentID
* load issue; load user ...
* return error again
* swagger def canged after LINT
* check if user has ben loaded
* add Tests
* better way of comparing results
* add suggestion
* use different issue for test
(dont interfear with integration test)
* test dont compare Location on timeCompare
* TEST: add forbidden dubble add
* add comments in code to explain
* add settings.UI.ReactionsMap
so if !setting.UI.ReactionsMap[opts.Type] works
* Support custom sanitization policy
Allowing the gitea administrator to configure sanitization policy allows
them to couple external renders and custom templates to support more
markup. In particular, the `pandoc` renderer allows generating KaTeX
annotations, wrapping them in `<span>` elements with class `math` and
either `inline` or `display` (depending on whether or not inline or
block mode was requested).
This iteration gives the administrator whitelisting powers; carefully
crafted regexes will thus let through only the desired attributes
necessary to support their custom markup.
Resolves: #9054
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Document new sanitization configuration
- Adds basic documentation to app.ini.sample,
- Adds an example to the Configuration Cheat Sheet, and
- Adds extended information to External Renderers section.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Drop extraneous length check in newMarkupSanitizer(...)
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix plural ELEMENT and ALLOW_ATTR in docs
These were left over from their initial names. Make them singular to
conform with the current expectations.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* add [ui] Reactions
* move contend check from form to go functions
* use else if
* check if reaction is allowed only on react
(so previous custom reaction can be still removed)
* use $.AllowedReactions in templates
* use ctx.Flash.Error
* use it there too
* add redirection
* back to server error
because a wrong reaction is a template issue ...
* add emoji list link
* add docs entry
* small wording nit
suggestions from @jolheiser - thx
* same reactions as github
* fix PR reactions
* handle error so template JS could check
* Add Integrations Test
* add REACTIONS setting to cheat-sheet doc page
* Add USE_SERVICE_WORKER setting
This will be very useful setting for anyone doing frontend work.
Fixes: https://github.com/go-gitea/gitea/issues/9044
* prevent potential syntax error on old browsers
* Graceful Shutdown for windows and others
Restructures modules/graceful, adding shutdown for windows, removing and
replacing the old minwinsvc code.
Creates a new waitGroup - terminate which allows for goroutines to
finish up after the shutdown of the servers.
Shutdown and terminate hooks are added for goroutines.
* Remove unused functions - these can be added in a different PR
* Add startup timeout functionality
* Document STARTUP_TIMEOUT
* Add retry for migration http/https requests
* give the more suitable name for retry configuraion items
* fix docs and lint
* Only use retryDownloader when setting > 1
* Add support for AUTO_WATCH_ON_CHANGES and AUTO_WATCH_ON_CLONE
* Update models/repo_watch.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Round up changes suggested by lafriks
* Added changes suggested from automated tests
* Updated deleteUser to take RepoWatchModeDont into account, corrected inverted DefaultWatchOnClone and DefaultWatchOnChanges behaviour, updated and added tests.
* Reinsert import "github.com/Unknwon/com" on http.go
* Add migration for new column `watch`.`mode`
* Remove serv code
* Remove WATCH_ON_CLONE; use hooks, add integrations
* Renamed watch_test.go to repo_watch_test.go
* Correct fmt
* Add missing EOL
* Correct name of test function
* Reword cheat and ini descriptions
* Add update to migration to ensure column value
* Clarify comment
Co-Authored-By: zeripath <art27@cantab.net>
* Simplify if condition
* in progress changes for #7405, added ability to add cross-repo dependencies
* removed unused repolink var
* fixed query that was breaking ci tests; fixed check in issue dependency add so that the id of the issue and dependency is checked rather than the indexes
* reverted removal of string in local files becasue these are done via crowdin, not updated manually
* removed 'Select("issue.*")' from getBlockedByDependencies and getBlockingDependencies based on comments in PR review
* changed getBlockedByDependencies and getBlockingDependencies to use a more xorm-like query, also updated the sidebar as a result
* simplified the getBlockingDependencies and getBlockedByDependencies methods; changed the sidebar to show the dependencies in a different format where you can see the name of the repository
* made some changes to the issue view in the dependencies (issue name on top, repo full name on separate line). Change view of issue in the dependency search results (also showing the full repo name on separate line)
* replace call to FindUserAccessibleRepoIDs with SearchRepositoryByName. The former was hardcoded to use isPrivate = false on the repo search, but this code needed it to be true. The SearchRepositoryByName method is used more in the code including on the user's dashboard
* some more tweaks to the layout of the issues when showing dependencies and in the search box when you add new dependencies
* added Name to the RepositoryMeta struct
* updated swagger doc
* fixed total count for link header on SearchIssues
* fixed indentation
* fixed aligment of remove icon on dependencies in issue sidebar
* removed unnecessary nil check (unnecessary because issue.loadRepo is called prior to this block)
* reverting .css change, somehow missed or forgot that less is used
* updated less file and generated css; updated sidebar template with styles to line up delete and issue index
* added ordering to the blocked by/depends on queries
* fixed sorting in issue dependency search and the depends on/blocks views to show issues from the current repo first, then by created date descending; added a "all cross repository dependencies" setting to allow this feature to be turned off, if turned off, the issue dependency search will work the way it did before (restricted to the current repository)
* re-applied my swagger changes after merge
* fixed split string condition in issue search
* changed ALLOW_CROSS_REPOSITORY_DEPENDENCIES description to sound more global than just the issue dependency search; returning 400 in the cross repo issue search api method if not enabled; fixed bug where the issue count did not respect the state parameter
* when adding a dependency to an issue, added a check to make sure the issue and dependency are in the same repo if cross repo dependencies is not enabled
* updated sortIssuesSession call in PullRequests, another commit moved this method from pull.go to pull_list.go so I had to re-apply my change here
* fixed incorrect setting of user id parameter in search repos call
* static url
* add cors support for static resources
* [assets] work on the migration to configurable url for assets
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [misc] fix whitespace
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] fix the loading of the manifest.json
It is generated dynamically, and as such can not be served by the cdn.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Revert "add cors support for static resources"
This reverts commit 42f964fd18
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] add the STATIC_URL_PREFIX option
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] reverse-proxy: nginx: add two setups for STATIC_URL_PREFIX
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] migrate the url of a new asset to the static url prefix
REF: f2a3abc683
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Expose db.SetMaxOpenConns and allow other dbs to set their connection params
* Add note about port exhaustion
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
This PR fixes#7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however.
## Features
- [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.)
- [x] Verify commits signed with the default gpg as valid
- [x] Signer, Committer and Author can all be different
- [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon.
- [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available
- Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg
- [x] Try to match the default key with a user on gitea - this is done at verification time
- [x] Make things configurable?
- app.ini configuration done
- [x] when checking commits are signed need to check if they're actually verifiable too
- [x] Add documentation
I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
* Prevent deadlock in indexer initialisation during graceful restart
* Move from gracehttp to our own service to add graceful ssh
* Add timeout for start of indexers and make hammer time configurable
* Fix issue with re-initialization in indexer during tests
* move the code to detect use of closed to graceful
* Handle logs gracefully - add a pid suffix just before restart
* Move to using a cond and a holder for indexers
* use time.Since
* Add some comments and attribution
* update modules.txt
* Use zero to disable timeout
* Move RestartProcess to its own file
* Add cleanup routine
Add password complexity checks. The default settings require a lowercase, uppercase, number and a special character within passwords.
Co-Authored-By: T-M-A <maxim.tkachenko@gmail.com>
Co-Authored-By: Lanre Adelowo <adelowomailbox@gmail.com>
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Restrict repository indexing by file extension
* Use REPO_EXTENSIONS_LIST_INCLUDE instead of REPO_EXTENSIONS_LIST_EXCLUDE and have a more flexible extension pattern
* Corrected to pass lint gosimple
* Add wildcard support to REPO_INDEXER_EXTENSIONS
* This reverts commit 72a650c8e4.
* Add wildcard support to REPO_INDEXER_EXTENSIONS (no make vendor)
* Simplify isIndexable() for better clarity
* Add gobwas/glob to vendors
* manually set appengine new release
* Implement better REPO_INDEXER_INCLUDE and REPO_INDEXER_EXCLUDE
* Add unit and integration tests
* Update app.ini.sample and reword config-cheat-sheet
* Add doc page and correct app.ini.sample
* Some polish on the doc
* Simplify code as suggested by @lafriks
* Add Backend Logic for Toggling Email Notification
This commit adds the backend logic for
allowing users to enable or disable email
notifications. The implementation ensures
that only issue notification emails get disabled
and important emails are still sent regardless
of the setting.
The UI to toggle this setting has not yet been
implemented.
* Add UI and complete user email notification enable
This commit completes the functionality to allow
users to disable their own email notifications.
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Third Option for Only Email on Mention
Signed-off-by: Gary Kim <gary@garykim.dev>
* Readd NOT NULL to new preference string
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Tests and Rewrite Comment
Signed-off-by: Gary Kim <gary@garykim.dev>
* Allow admin to set default email frequency
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add new config option to docs
Signed-off-by: Gary Kim <gary@garykim.dev>
* Fix a few mistakes
Signed-off-by: Gary Kim <gary@garykim.dev>
* Only update required columns
Signed-off-by: Gary Kim <gary@garykim.dev>
* Simplify an error check
Signed-off-by: Gary Kim <gary@garykim.dev>
* Make email_notification_preference column in DB be VARCHAR(20)
Signed-off-by: Gary Kim <gary@garykim.dev>
* Handle errors
Signed-off-by: Gary Kim <gary@garykim.dev>
* Update models/migrations/v93.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add description in repository search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Refactor SearchRepositoryByName with a general function SearchRepository
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Allow to specify if description shall be included in API repo search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add new app.ini setting for whether to search within repo description.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Search keyword in description (if setting enabled) on:
- Explore page
- Organization profile page
- User profile page
- Admin repo page
Do not search keyword in description on:
- Any non-keyword search (not relevant)
- Incremental search (uses API)
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Put parameters related to keyword directly after it
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test cases for including (and not including) repository description in search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Rename test function from TestSearchRepositoryByName to TestSearchRepository.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make setting SEARCH_REPO_DESCRIPTION default to true
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add support for DEFAULT_ORG_MEMBER_VISIBLE
* Correct formatting
* Improved description in cheat sheet.
* Add test for DefaultOrgMemberVisible
* Remove dead code
* display ui time with customize time location
* fix lint
* rename UILocation to DefaultUILocation
* move time related functions to modules/timeutil
* fix tests
* fix tests
* fix build
* fix swagger
* Only show repository avatar in list when one was selected
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds fallback configuration option for repository avatar
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Implements repository avatar fallback
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds admin task for deleting generated repository avatars
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Solve linting issues
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Save avatar before updating database
* Linting
* Update models/repo.go
Co-Authored-By: zeripath <art27@cantab.net>
* Repository avatars
- first variant of code from old work for gogs
- add migration 87
- add new option in app.ini
- add en-US locale string
- add new class in repository.less
* Add changed index.css, remove unused template name
* Update en-us doc about configuration options
* Add comments to new functions, add new option to docker app.ini
* Add comment for lint
* Remove variable, not needed
* Fix formatting
* Update swagger api template
* Check if avatar exists
* Fix avatar link/path checks
* Typo
* TEXT column can't have a default value
* Fixes:
- remove old avatar file on upload
- use ID in name of avatar file - users may upload same files
- add simple tests
* Fix fmt check
* Generate PNG instead of "static" GIF
* More informative comment
* Fix error message
* Update avatar upload checks:
- add file size check
- add new option
- update config docs
- add new string to en-us locale
* Fixes:
- use FileHEader field for check file size
- add new test - upload big image
* Fix formatting
* Update comments
* Update log message
* Removed wrong style - not needed
* Use Sync2 to migrate
* Update repos list view
- bigger avatar
- fix html blocks alignment
* A little adjust avatar size
* Use small icons for explore/repo list
* Use new cool avatar preparation func by @lafriks
* Missing changes for new function
* Remove unused import, move imports
* Missed new option definition in app.ini
Add file size check in user/profile avatar upload
* Use smaller field length for Avatar
* Use session to update repo DB data, update DeleteAvatar - use session too
* Fix err variable definition
* As suggested @lafriks - return as soon as possible, code readability
* Add options to git.Clone to make it more capable
* Begin the process of removing the local copy and tidy up
* Remove Wiki LocalCopy Checkouts
* Remove the last LocalRepo helpers
* Remove WithTemporaryFile
* Enable push-hooks for these routes
* Ensure tests cope with hooks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove Repository.LocalCopyPath()
* Move temporary repo to use the standard temporary path
* Fix the tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove LocalWikiPath
* Fix missing remove
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use AppURL for Oauth user link (#6894)
* Use AppURL for Oauth user link
Fix#6843
* Update oauth.go
* Update oauth.go
* internal/ssh: ignore env command totally (#6825)
* ssh: ignore env command totally
* Remove commented code
Needed fix described in issue #6889
* Escape the commit message on issues update and title in telegram hook (#6901)
* update sdk to latest (#6903)
* improve description of branch protection (fix#6886) (#6906)
The branch protection description text were not quite accurate.
* Fix logging documentation (#6904)
* ENABLE_MACARON_REDIRECT should be REDIRECT_MACARON_LOG
* Allow DISABLE_ROUTER_LOG to be set in the [log] section
* [skip ci] Updated translations via Crowdin
* Move sdk structs to modules/structs (#6905)
* move sdk structs to moduels/structs
* fix tests
* fix fmt
* fix swagger
* fix vendor
Adds a new key DEFAULT_SHOW_FULL_NAME (default false) to the [ui] section.
If enabled the full name will be shown (unless it's empty, then
the default username will be used)
* Prevent creating empty sessions
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/setting/session.go
* Remove unnecessary option
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add destory to list of ignored misspellings
* rename cookie.go -> virtual.go
* Delete old file
* Add test to ensure that sessions are not created without being logged in
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update integrations/create_no_session_test.go
* Add SUBJECT_PREFIX mailer config option
* Add space between subject prefix and subject (Change from Gogs)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add option to disable refresh token invalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add integration tests and remove wrong todos
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix typo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix tests and add documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Rename BaseLogger to WriterLogger to help the creation of other providers
* Don't export ColorBytes and ResetBytes from ColoredValues
* Make integration tests only print logs if they fail
* check can color before coloring
* I always forget about MSSQL
* Oh and use LEVEL in sqlite.ini
* Make the test logger log at info - as it means you see the router
* Remove empty expected changes
* Make the migrations quieter too
* Don't display SQL on error - it can be looked at in the file logs if necessary
* Fix skip when using onGiteaRun
* Panic don't fatal on create new logger
Fixes#5854
Signed-off-by: Andrew Thornton <art27@cantab.net>
* partial broken
* Update the logging infrastrcture
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset the skip levels for Fatal and Error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* broken ncsa
* More log.Error fixes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove nal
* set log-levels to lowercase
* Make console_test test all levels
* switch to lowercased levels
* OK now working
* Fix vetting issues
* Fix lint
* Fix tests
* change default logging to match current gitea
* Improve log testing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* reset error skip levels to 0
* Update documentation and access logger configuration
* Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE
* Fix broken level caching
* Refactor the router log
* Add Router logger
* Add colorizing options
* Adjust router colors
* Only create logger if they will be used
* update app.ini.sample
* rename Attribute ColorAttribute
* Change from white to green for function
* Set fatal/error levels
* Restore initial trace logger
* Fix Trace arguments in modules/auth/auth.go
* Properly handle XORMLogger
* Improve admin/config page
* fix fmt
* Add auto-compression of old logs
* Update error log levels
* Remove the unnecessary skip argument from Error, Fatal and Critical
* Add stacktrace support
* Fix tests
* Remove x/sync from vendors?
* Add stderr option to console logger
* Use filepath.ToSlash to protect against Windows in tests
* Remove prefixed underscores from names in colors.go
* Remove not implemented database logger
This was removed from Gogs on 4 Mar 2016 but left in the configuration
since then.
* Ensure that log paths are relative to ROOT_PATH
* use path.Join
* rename jsonConfig to logConfig
* Rename "config" to "jsonConfig" to make it clearer
* Requested changes
* Requested changes: XormLogger
* Try to color the windows terminal
If successful default to colorizing the console logs
* fixup
* Colorize initially too
* update vendor
* Colorize logs on default and remove if this is not a colorizing logger
* Fix documentation
* fix test
* Use go-isatty to detect if on windows we are on msys or cygwin
* Fix spelling mistake
* Add missing vendors
* More changes
* Rationalise the ANSI writer protection
* Adjust colors on advice from @0x5c
* Make Flags a comma separated list
* Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING
* Ensure matching is done on the non-colored message - to simpify EXPRESSION
* fixes#5957
* add tests to make sure config option is respected
* use already defined struct
* - use migration to make the flag repo wide not for the entire gitea instance
Also note that the config value can still be set so as to be able to control the value for new repositories that are to be created
- fix copy/paste error in copyright header year and rearrange import
- use repo config instead of server config value to determine if a commit should close an issue
- update testsuite
* use global config only when creating a new repository
* allow repo admin toggle feature via UI
* fix typo and improve testcase
* fix fixtures
* add DEFAULT prefix to config value
* fix test
* Feature - Pagination for git tree API
* Handles case when page is negative
* Does a for loop over the start and end rather than all entries
* Removed redundent logic
* Adds per_page as a query parameter
* Adds DEFAULT_GIT_TREES_PER_PAGE for settings, ran make fmt
* Fix typo in cheat-sheet en
* Makes page start at 1, generated swagger
* Use updates to SDK
* Updates to use latest sdk
* Updates swagger for tree api
* Adds test for GetTreeBySHA
* Updates per PR reviews
* Updates per PR reviews
* Remove file
* Formatting
* Fix to swagger file
* Fix to swagger
* Update v1_json.tmpl
* Fix to swagger file
* Create log mailer for testing email settings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Switch on the log mailer for the integration tests
This ensures that the sending mail process works
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename the from user for mysql/mssql
* rename log sender to dummy sender
* update the integration tests
Add a new config option to enable / disable the automatic watching of
repos for new repositories and if a user is added to a team.
Fixes#653
Signed-off-by: Sebastian Sauer <sauer.sebastian@gmail.com>
* add migration and basic UI for changing a user's theme
* update user themem
* use right text on button
* load theme based on users' selection
* load theme based on users' selection in pwa too
* update sample config
* delete older theme loading
* implement AfterLoad to set users' theme properly
* set up default theme when creating a user. This uses the installation wide theme
* use flash messages for error
* set default theme when creating a user from the cli
* fix @lunny review
* Explicitly disable Git credential helper
If the user running Gitea has configured a credential helper, Git
credentials might leak out of Gitea.
There are two problems with credential helpers when combined with Gitea:
1. Credentials entered by a user when doing a migration or setting up a
mirror will end up in the credential store. In the worst case, this
is the plain text file ~/.git-credentials.
2. Credentials in the credential store will be used for migrations and
mirrors by all users. For example, if user A sets up a mirror, their
credentials will be stored. If user B later sets up a mirror from the
same host and does not enter any credentials, user A's credentials
will be used.
This PR prepends -c credential.helper= to all Git commands to clear the
list of helpers. This requires at least Git version 2.9, as previous
versions will try to load an empty helper instead. For more details, see
24321375cd
* Update git module
* Added basic heatmap data
* Added extra case for sqlite
* Built basic heatmap into user profile
* Get contribution data from api & styling
* Fixed lint & added extra group by statements for all database types
* generated swagger spec
* generated swagger spec
* generated swagger spec
* fixed swagger spec
* fmt
* Added tests
* Added setting to enable/disable user heatmap
* Added locale for loading text
* Removed UseTiDB
* Updated librejs & moment.js
* Fixed import order
* Fixed heatmap in postgresql
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-Authored-By: kolaente <konrad@kola-entertainments.de>
* Added copyright header
* Fixed a bug to show the heatmap for the actual user instead of the currently logged in
* Added integration test for heatmaps
* Added a heatmap on the dashboard
* Fixed timestamp parsing
* Hide heatmap on mobile
* optimized postgresql group by query
* Improved sqlite group by statement
ENABLE_LETSENCRYPT and LETSENCRYPT_ACCEPTTOS were not being properly loaded from the config file, always resulting in the default settings being in place.
* prevent pull request to be merged when PR is a WIP
* add tests
* add helper to prepend WIP: in PR title
* move default wip prefixes into settings
* use configurable WIP prefixes in javascript and default to first one in templates
* add documentation
* add unit test on pull model
Signed-off-by: Julien Tant <julien@craftyx.fr>
* Initial ui components for pull request review
* Add Review
Add IssueComment types
Signed-off-by: Jonas Franz <info@jonasfranz.software>
(cherry picked from commit 2b4daab)
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Replace ReviewComment with Content
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add load functions
Add ReviewID to findComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add create review comment implementation
Add migration for review
Other small changes
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Simplified create and find functions for review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved "Pending" to first position
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add GetCurrentReview to simplify fetching current review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Preview for listing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move new comment form to its own file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Implement Review form
Show Review comments on comment stream
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for single comments
Showing buttons in context
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add pending tag to pending review comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for Review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fetch all review ids at once
Add unit tests
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improved comment rendering in "Files" view by adding Comments to DiffLine
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for invalidating comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Switched back to code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved review migration from v64 to v65
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Rebuild css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improve translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix unit tests by updating fixtures and updating outdated test
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Comments will be shown at the right place now
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for deleting CodeComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by files in subdirectories
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for showing code comments of reviews in conversation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for "Show/Hide outdated"
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for new webhooks
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Resolve conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor UI improvements
* update code.gitea.io/git
* Fix ui bug reported by @lunny causing wrong position of add button
Add functionality to "Cancel" button
Add scale effects to add button
Hide "Cancel" button for existing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Prepare solving conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show add button only if no comments already exist for the line
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add missing vendor files
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Check if reviewer is nil
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show forms only to users who are logged in
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Revert "Show forms only to users who are logged in"
This reverts commit c083682
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Save patch in comment
Render patch for code comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add link to comment in code
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add reply form to comment list
Show forms only to signed in users
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add 'Reply' as translatable
Add CODE_COMMENT_LINES setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems introduced by checking for singed in user
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add v70
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update generated stylesheet
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix preview
Beginn with new review comment patch system
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add new algo to generate diff for line range
Remove old algo used for cutting big diffs (it was very buggy)
* Add documentation and example for CutDiffAroundLine
* Fix example of CutDiffAroundLine
* Fix some comment UI rendering bugs
* Add code comment edit mode
* Send notifications / actions to users until review gets published
Fix diff generation bug
Fix wrong hashtag
* Fix vet errors
* Send notifications also for single comments
* Fix some notification bugs, fix link
* Fix: add comment icon is only shown on code lines
* Add lint comment
* Add unit tests for git diff
* Add more error messages
* Regenerated css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* fmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Regenerated CSS with latest less version
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix test by updating comment type to new ID
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Introducing CodeComments as type for map[string]map[int64][]*Comment
Other minor code improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix data-tab issues
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove unnecessary change
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* refactored checkForInvalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Append comments instead of setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Use HeadRepo instead of BaseRepo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update migration
Signed-off-by: Jonas Franz <info@jonasfranz.de>
* Regenerated CSS
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add copyright
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update index.css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
This makes it easier for user who want to theme but
don't have the ability to know how to customize templates
all that is required is a change in a config option
The reason why I chose the DEFAULT_THEME as variable,
as perhaps in the future we will allow users to chose their
theme whon logged in just like we do with languages
https://github.com/go-gitea/gitea/pull/4035#issuecomment-394286204
@ohwgiles points out that the config section should, in fact, still be in accordance with the "server" struct, which contains the "LFS" struct. I should just remove the line
```
sec = Cfg.Section("LFS")
```
* Add support for U2F
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add vendor library
Add missing translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F support for Firefox, Chrome (Android) by introducing a custom JS library
Add U2F error handling
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F login page to OAuth
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move U2F user settings to a separate file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for u2f model
Renamed u2f table name
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by refactoring
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove not needed console.log-s
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add default values to app.ini.sample
Add FIDO U2F to comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add an option to allow redirect of http port 80 to https.
This is an "opt in" option (default is to not redirect). It will only redirect
if protocol is https and the new REDIRECT_PORT_80 option is set to true.
The Port to redirect in previous commit was hardcoded to 80, now it can be
specified in the app.ini, defaulting to 80. The boolean option to turn
redirection on has been changed to REDIRECT_OTHER_PORT to be logically
consistent with the new port option.
Signed-off-by: Mike Fellows <mike.fellows@shaw.ca>
* Extended LANDINGPAGE config variable to logged in users and added switch for 'organizations' in addition to 'home' and 'explore'.
* Updated comments.
Signed-off-by: Mike Schaffer <mschaff@gmail.com>
* Extended LANDINGPAGE config variable to trigger when user logs in and added switch for 'organizations' in addition to 'home' and 'explore'.
Signed-off-by: Mike Schaffer <mschaff@gmail.com>
* Extended LANDINGPAGE config variable to logged in users and added switch for 'organizations' in addition to 'home' and 'explore'.
* Updated comments.
Signed-off-by: Mike Schaffer <mschaff@gmail.com>
* Extended LANDINGPAGE config variable to trigger when user logs in and added switch for 'organizations' in addition to 'home' and 'explore'.
Signed-off-by: Mike Schaffer <mschaff@gmail.com>
* Removed superfluous conditional and correct whitespace.
Signed-off-by: Mike Schaffer <mschaff@gmail.com>
* Update app.ini
Reverted new line.
* Formatting.
Signed-off-by: Mike Schaffer <mschaff@gmail.com>
* Set session and indexers' data files rel to AppDataPath
The setting AppDataPath is now relative to the working directory.
The session svc's PROVIDER_CONFIG now defaults to AppDataPath/data/sessions.
The issue indexer's IssuePath now defaults to AppDataPath/indexers/issues.bleves.
* fix bug
* Add commit count caching
* Small refactoring
* Add different key prefix for refs and commits
* Add configuratuion option to allow to change caching time or disable it
* Add support for extra sendmail arguments
* Sendmail args to exec.command should be a list
* Add go-shellquote package
* Use go-shellquote lib for parsing Sendmail args
* Only parse if sendmail is configured
MAX_GIT_DIFF_LINE_CHARACTERS was updated in #1845 but the corresponding
default value of MaxGitDiffLineCharacters was not changed. This can lead
to inconsistencies.
* Configurable SSH cipher suite
* Update configuration file comment
* Add default in settings loading code
* Fix fmt and log messsage
* Remove default from code as this could probably might not be good idea
* Allow custom SSH user in UI for built-in SSH server (#2617)
* Some fixes
* Did make fmt
* Updated according to review
- Renamed config to BUILTIN_SSH_SERVER_USER
- Removed unnecessary default string value for config item
* Updated according to review
* Fixed some minor issues
* Fix sending mail with a non-latin display name. #2102
Signed-off-by: Rémi Saurel <contact@remi-saurel.com>
* Take into account the possibility that setting.MailService.From is in `name <email@address>` format. #2102
Signed-off-by: Rémi Saurel <contact@remi-saurel.com>
* Create option to disable githooks globally via configuration file
* Update comment in app.ini to align with @ethantkoenig's suggestion
Signed-off-by: Matti Ranta <matti@mdranta.net>
* Added comment's hashtag to url for mail notifications.
* Added explanation to return statement + documentation.
* Replacing in-line link generation with HTMLURL. (+gofmt)
* Replaced action-based model with nil-based model. (+gofmt)
* Replaced mailIssueActionToParticipants with mailIssueCommentToParticipants.
* Updating comment for mailIssueCommentToParticipants
* Added link to comment in "Dashboard"
* Deleting feed entry if a comment is going to be deleted
* Added migration
* Added improved migration to add a CommentID column to action.
* Added improved links to comments in feed entries.
* Fixes#1956 by filtering for deleted comments that are referenced in actions.
* Introducing "IsDeleted" column to action.
* Adding design draft (not functional)
* Adding database models for stopwatches and trackedtimes
* See go-gitea/gitea#967
* Adding design draft (not functional)
* Adding translations and improving design
* Implementing stopwatch (for timetracking)
* Make UI functional
* Add hints in timeline for time tracking events
* Implementing timetracking feature
* Adding "Add time manual" option
* Improved stopwatch
* Created report of total spent time by user
* Only showing total time spent if theire is something to show.
* Adding license headers.
* Improved error handling for "Add Time Manual"
* Adding @sapks 's changes, refactoring
* Adding API for feature tracking
* Adding unit test
* Adding DISABLE/ENABLE option to Repository settings page
* Improving translations
* Applying @sapk 's changes
* Removing repo_unit and using IssuesSetting for disabling/enabling timetracker
* Adding DEFAULT_ENABLE_TIMETRACKER to config, installation and admin menu
* Improving documentation
* Fixing vendor/ folder
* Changing timtracking routes by adding subgroups /times and /times/stopwatch (Proposed by @lafriks )
* Restricting write access to timetracking based on the repo settings (Proposed by @lafriks )
* Fixed minor permissions bug.
* Adding CanUseTimetracker and IsTimetrackerEnabled in ctx.Repo
* Allow assignees and authors to track there time too.
* Fixed some build-time-errors + logical errors.
* Removing unused Get...ByID functions
* Moving IsTimetrackerEnabled from context.Repository to models.Repository
* Adding a seperate file for issue related repo functions
* Adding license headers
* Fixed GetUserByParams return 404
* Moving /users/:username/times to /repos/:username/:reponame/times/:username for security reasons
* Adding /repos/:username/times to get all tracked times of the repo
* Updating sdk-dependency
* Updating swagger.v1.json
* Adding warning if user has already a running stopwatch (auto-timetracker)
* Replacing GetTrackedTimesBy... with GetTrackedTimes(options FindTrackedTimesOptions)
* Changing code.gitea.io/sdk back to code.gitea.io/sdk
* Correcting spelling mistake
* Updating vendor.json
* Changing GET stopwatch/toggle to POST stopwatch/toggle
* Changing GET stopwatch/cancel to POST stopwatch/cancel
* Added migration for stopwatches/timetracking
* Fixed some access bugs for read-only users
* Added default allow only contributors to track time value to config
* Fixed migration by chaging x.Iterate to x.Find
* Resorted imports
* Moved Add Time Manually form to repo_form.go
* Removed "Seconds" field from Add Time Manually
* Resorted imports
* Improved permission checking
* Fixed some bugs
* Added integration test
* gofmt
* Adding integration test by @lafriks
* Added created_unix to comment fixtures
* Using last event instead of a fixed event
* Adding another integration test by @lafriks
* Fixing bug Timetracker enabled causing error 500 at sidebar.tpl
* Fixed a refactoring bug that resulted in hiding "HasUserStopwatch" warning.
* Returning TrackedTime instead of AddTimeOption at AddTime.
* Updating SDK from go-gitea/go-sdk#69
* Resetting Go-SDK back to default repository
* Fixing test-vendor by changing ini back to original repository
* Adding "tags" to swagger spec
* govendor sync
* Removed duplicate
* Formatting templates
* Adding IsTimetrackingEnabled checks to API
* Improving translations / english texts
* Improving documentation
* Updating swagger spec
* Fixing integration test caused be translation-changes
* Removed encoding issues in local_en-US.ini.
* "Added" copyright line
* Moved unit.IssuesConfig().EnableTimetracker into a != nil check
* Removed some other encoding issues in local_en-US.ini
* Improved javascript by checking if data-context exists
* Replaced manual comment creation with CreateComment
* Removed unnecessary code
* Improved error checking
* Small cosmetic changes
* Replaced int>string>duration parsing with int>duration parsing
* Fixed encoding issues
* Removed unused imports
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add configuration flag SSH_EXPOSE_ANONYMOUS
If this flag (default True) is set to false, the SSH clone URL will only be exposed if the current user is signed in.
* Default SSH exposure set to false
To match GitHub and for security reasons, SSH URL exposure is disabled by default.
In addition to that. minor code changes have been applied.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* Add integration tests
* Hide clone button neither HTTP and SSH is enabled
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* Add setting to disable authorized_keys backup when rewriting public keys
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Update default value to comply with documentation
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Use tmp-file instead of bak-file for saving manually added keys.
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Change casing
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Change casing and build bakpath with sprintf only
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Only close file once
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Do not modify calcFingerprint
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Fix casing
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Change style from disable to enable
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Change name, just SSH_BACKUP_AUTHORIZED_KEYS
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
* Do not check for directory existence if backup is disabled
Signed-off-by: Magnus Lindvall <magnus@dnmgns.com>
The well commented conf/app.ini file that comes with the code shows the
ROOT_URL (i.e. setting.AppURL) as:
ROOT_URL = %(PROTOCOL)s://%(DOMAIN)s:%(HTTP_PORT)s/
However the installed custom/conf/app.ini file does not include this setting as
shown, and the default in the setting module was hard coded to
http://localhost:3000/ instead of what is shown above.
With this change the ROOT_URL will default to what is shown above if it is not
set in the custom/conf/app.ini.
Of course it is still possible to override the default by adding the ROOT_URL
setting to your custom/conf/app.ini file as usual.
Signed-off-by: Mike Fellows <mike.fellows@shaw.ca>
* Send mails as HTML as default. Setting for send as plain text.
* Add new option SendAsPlainText. remove EnableHTMLAlternative
* Send HTML mails as default
* Add html check if html2text should be performed
* Send only multipart or plain. Add deprication warning for ENABLE_HTML_ALTERNATIVE
* Still use ENABLE_HTML_ALTERNATIVE for backward compatibility
* Changed to not ignore html2text errors
* Include formatting check to the `make check` rule
... and give it its own standalone target too (make fmt-check)
Show diff on fmt-check failure
Do not allow running "fmt-check" with incompatible go version
Also simplify the `fmt` rule
* Forbid running "make fmt" with Go version != 1.7 or 1.8
* Ignore bindata.go for spelling and formatting checks
also remove duplicated variable assignment for GOFILES
* Run `make fmt`
* add internal routes for ssh hook comands
* fix lint
* add comment on why package named private not internal but the route name is internal
* add comment above package private why package named private not internal but the route name is internal
* remove exp time on internal access
* move routes from /internal to /api/internal
* add comment and defer on UpdatePublicKeyUpdated
* Allow ENABLE_OPENID_SIGNUP to depend on DISABLE_REGISTRATION
Omit the configuration variable (the default) to be dependent.
Fixes#1363
* Move OpenID settings under Service object
* Show OpenID SignUp and SignIn status in admin panel / configuration
* Fix for #828
Add build tags to ldflags and print in version output
Signed-off-by: Jonas Östanbäck <jonas.ostanback@gmail.com>
* Reworked formatBuiltWith function
Signed-off-by: Jonas Östanbäck <jonas.ostanback@gmail.com>
* Add tags to version information in admin panel
Signed-off-by: Jonas Östanbäck <jonas.ostanback@gmail.com>
* Added new variable for use on admin page.
Signed-off-by: Jonas Östanbäck <jonas.ostanback@gmail.com>
* Fixed incorrect indentation
* Allow using custom time format
I need to use custom time format in `conf/app.ini' like
FORMAT = 2006-01-02 15:04:05
so that Gitea will display '2017-01-30 08:41:49'
check this answer for more constants to format date <http://stackoverflow.com/a/20234207/2570425>
PS: First GO commit
* Refactor and validate TimeFormat (must have 2006, 01, 02, 15, 04 and 05)
This change corrects a few logging issues:
* Standardized formatting errors with '%v'.
* Standardized failure warning word usage.
* Corrected an instance of using the standard log library when
the gitea log library should be used instead.
* Remove the default console logger when it is not set in the configuration
* Added comment to new function (lint failure)
* update based on PR comments (code style)
* code style fix (thanks bkcsoft)
* check if logger exists based on the l.outputs (like in l.DelLogger) instead of adapter, otherwise panic when reinstalling gitea (since the output adapter still exist, without outputs)
* Moved attachaments POST url from /issues/attachments to /attachments
* Implemented attachment upload on release page
* Implemented downloading attachments on the release page
* Added zip and gzip files to default allowed attachments
* Implemented uploading attachments on edit release
* Renamed UploadIssueAttachment to UploadAttachment
- Add site-wide option DEFAULT_KEEP_EMAIL_PRIVATE.
- Add the new option to the install and admin/config pages.
- Add the new option to app.ini in the service section.
- Add the new option to the settings struct.
- Add English text strings to i18n.
- Add field KeepEmailPrivate to user struct.
- Add field KeepEmailPrivate to user form.
- Add option to UI.
- Add using noreply email address if user has "Keep Email Private".
An email address <LowerName>@<NO_REPLY_ADDRESS> is now used in commit
messages (and hopefully all other git log relevant places). The
change relies on the fact that git commands should use
user.NetGitSig().
- Add hiding of email address in UI, if user has set "Keep Email Private".
- Add condition to show email address only on explore/users and user
pages, if user has not set "Keep Email Private".
- Add noreply email in API if set "Keep Email Private".
- Add a new service setting NO_REPLY_ADDRESS. The value of this
setting is used as the domain part for the user's email address in
git log, iff he decides to keep his email address private.
If the user decides to keep his email address private and this
option is not set 'noreply.example.org' is used, which no MTA
should send email to.
Add NO_REPLY_ADDRESS to conf/app.ini.
* UI config to toggle whether user email shows up in Explore Users
* Recommendation made by @tboerger
66a1c59fe7 (r94122732)
* fixed typo, rename ShowUserEmailInExplore to ShowUserEmail
* Fixed typo merged conflict
* Hide email in the user profile page
if you are active ShowUserEmail
ref https://github.com/go-gitea/gitea/pull/336#issuecomment-269843725
* Please replace MustBool() with MustBool(true)
* Import github.com/git-lfs/lfs-test-server as lfs module base
Imported commit is 3968aac269a77b73924649b9412ae03f7ccd3198
Removed:
Dockerfile CONTRIBUTING.md mgmt* script/ vendor/ kvlogger.go
.dockerignore .gitignore README.md
* Remove config, add JWT support from github.com/mgit-at/lfs-test-server
Imported commit f0cdcc5a01599c5a955dc1bbf683bb4acecdba83
* Add LFS settings
* Add LFS meta object model
* Add LFS routes and initialization
* Import github.com/dgrijalva/jwt-go into vendor/
* Adapt LFS module: handlers, routing, meta store
* Move LFS routes to /user/repo/info/lfs/*
* Add request header checks to LFS BatchHandler / PostHandler
* Implement LFS basic authentication
* Rework JWT secret generation / load
* Implement LFS SSH token authentication with JWT
Specification: https://github.com/github/git-lfs/tree/master/docs/api
* Integrate LFS settings into install process
* Remove LFS objects when repository is deleted
Only removes objects from content store when deleted repo is the only
referencing repository
* Make LFS module stateless
Fixes bug where LFS would not work after installation without
restarting Gitea
* Change 500 'Internal Server Error' to 400 'Bad Request'
* Change sql query to xorm call
* Remove unneeded type from LFS module
* Change internal imports to code.gitea.io/gitea/
* Add Gitea authors copyright
* Change basic auth realm to "gitea-lfs"
* Add unique indexes to LFS model
* Use xorm count function in LFS check on repository delete
* Return io.ReadCloser from content store and close after usage
* Add LFS info to runWeb()
* Export LFS content store base path
* LFS file download from UI
* Work around git-lfs client issue with unauthenticated requests
Returning a dummy Authorization header for unauthenticated requests
lets git-lfs client skip asking for auth credentials
See: https://github.com/github/git-lfs/issues/1088
* Fix unauthenticated UI downloads from public repositories
* Authentication check order, Finish LFS file view logic
* Ignore LFS hooks if installed for current OS user
Fixes Gitea UI actions for repositories tracking LFS files.
Checks for minimum needed git version by parsing the semantic version
string.
* Hide LFS metafile diff from commit view, marking as binary
* Show LFS notice if file in commit view is tracked
* Add notbefore/nbf JWT claim
* Correct lint suggestions - comments for structs and functions
- Add comments to LFS model
- Function comment for GetRandomBytesAsBase64
- LFS server function comments and lint variable suggestion
* Move secret generation code out of conditional
Ensures no LFS code may run with an empty secret
* Do not hand out JWT tokens if LFS server support is disabled
* Implemented sendmail. This piggybacks on existing configuration to keep the change simple
* Changed privicy of new sendSMTP and sendSendmail functions
* Fixed Lint errors
* Seperated SMTP and sendmail into their own senders
* Making new structs private as they should not be used externally now
* Added sendmail setting to ini file
* Minor code cleanup
* Enables mssql support
Port of dlobs work in gogs.
Enables options in index.js
Enables MSSQL as a database option in go.
Sets ID to 0 on initial migration. Required for
MSSQL insert statements.
Signed-off-by: Beau Trepp <beautrepp@gmail.com>
* Vendors in denisenkom/go-mssqldb
Includes golang.org/x/crypto/md4
as this is required by go-msssqldb
Signed-off-by: Beau Trepp <beautrepp@gmail.com>
* Moved conf assets into options folder
* Dropped old bindata
* Started to integrate options bindata and accessors
* Do not enforce a builtin app.ini
* Replaced bindata calls with options
* Dropped bindata task from makefile, it's the generate task now
* Always embedd app.ini to provide sane config defaults
* Use sane defaults for the configuration
* Defined default value for SSH_KEYGEN_PATH
* Dropped "NEVER EVER MODIFY THIS FILE" header from app.ini
* Fixed new paths in latest test additions
* Drop bindata with make clean task
* Set more proper default values
* Get rid of the bin folder within the build process
Signed-off-by: Thomas Boerger <thomas@webhippie.de>
* Dropped latest make task, it is unused
Signed-off-by: Thomas Boerger <thomas@webhippie.de>
* Added tidb tag to drone config
Signed-off-by: Thomas Boerger <thomas@webhippie.de>
* Dropped the cert build tag
Signed-off-by: Thomas Boerger <thomas@webhippie.de>
* Dropped useless minwinsvc build tag
Signed-off-by: Thomas Boerger <thomas@webhippie.de>
* Dropped the useless build tags from drone config
Signed-off-by: Thomas Boerger <thomas@webhippie.de>
Still use GOGS_WORK_DIR and GOGS_CUSTOM env variables
as a fallback if the equivalent GITEA_* are not set,
warning user about the need for change.
Does not change "gogs" to "gitea" in webhook type name
Because "gogs" hook type is part of the API (routes) and used
in templates...
Closes#87
* Add support for federated avatars
Fixes#3105
Removes avatar fetching duplication code
Adds an "Enable Federated Avatar" checkbox in user settings
(defaults to unchecked)
Moves avatar settings all in the same form, making
local and remote avatars mutually exclusive
Renames UploadAvatarForm to AvatarForm
as it's not anymore only for uploading
* Run gofmt on all modified files
* Move Avatar form in its own page
* Add go-libravatar dependency to vendor/ dir
Hopefully helps with accepting the contribution.
See also #3214
* Revert "Add go-libravatar dependency to vendor/ dir"
This reverts commit a8cb93ae640bbb90f7d25012fc257bda9fae9b82.
* Make federated avatar setting a global configuration
Removes the per-user setting
* Move avatar handling back to base tool, disable federated avatar in offline mode
* Format, handle error
* Properly set fallback host
* Use unsupported github.com mirror for importing go-libravatar
* Remove comment showing life exists outside of github.com
... pity, but contribution would not be accepted otherwise
* Use Combo for Get and Post methods over /avatar
* FEDERATED_AVATAR -> ENABLE_FEDERATED_AVATAR
* Fix persistance of federated avatar lookup checkbox at install time
* Federated Avatars -> Enable Federated Avatars
* Use len(string) == 0 instead of string == ""
* Move import line where it belong
See
https://github.com/Unknwon/go-code-convention/blob/master/en-US/import_packages.md
Pity the import url is still the unofficial one, but oh well...
* Save a line (and waste much more expensive time)
* Remove redundant parens
* Remove an empty line
* Remove empty lines
* Reorder lines to make diff smaller
* Remove another newline
Unknwon review got me start a fight against newlines
* Move DISABLE_GRAVATAR and ENABLE_FEDERATED_AVATAR after OFFLINE_MODE
On re-reading the diff I figured what Unknwon meant here:
https://github.com/gogits/gogs/pull/3320/files#r73741106
* Remove newlines that weren't there before my intervention
- Try to reduce memory allocations
- Add possibility to disable diff highlight (can improve performance for large diffs)
- Tweaking with cost for prettier (cleaner) diffs
- Do not calculate diff when the number of removed lines in a block is not equal to the number of added lines (this usually resulted in ugly diffs)
Config option [server] SSH_LISTEN_PORT to the port the builtin SSH server will be listen.
It can be different from SSH_PORT which is supposed to be exposed in the clone URL.
This should solve the problem when user runs Gogs inside Docker container
and still want to use builtin SSH server.
This commit adds the possibibility to use either the native golang
libraries or ssh-keygen to check public keys. The check is adjusted
depending on the settings, so that only supported keys are let through.
This commit also brings back the blacklist feature, which was removed in
7ef9a05588. This allows to blacklist
algorythms or keys based on the key length. This works with the native
and the ssh-keygen way.
Because of #2179 it also includes a way to adjust the path to
ssh-keygen and the working directory for ssh-keygen. With this,
sysadmins should be able to adjust the settings in a way, that SELinux
is okay with it. In the worst case, they can switch to the native
implementation and only loose support for ed25519 keys at the moment.
There are some other places which need adjustment to utilize the
parameters and the native implementation, but this sets the ground work.
Local (DMZ) URL for gogs workers (such as ssh update) accessing web service. In
most cases you do not need to change default http://localhost:HTTP_PORT/. You
may need to alter it only if your ssh server node is not the same as http node,
eg. running behind proxy on different node than web server.
--- 80 public port -> 8080 -- web server node
/
public proxy --<
\
--- 22 public port -> 10022 -- ssh server node
This option is not intended to be accessible via web GUI settings, since it is
unlikely someone needs to change it to somethings else than default
http://localhost:HTTP_PORT/ which should work for most of the cases.
But this should land into the documentation somewhere.
fixup
The SendMail function is rewritten and has the following new functionality:
- It is optional to skip verification of keys. The config option SKIP_VERIFY is added
- If the port is 465, or ending on 465, the TLS(/SSL) connection is started first.
