2022-09-02 21:18:23 +02:00
|
|
|
// Copyright 2017 The Gitea Authors. All rights reserved.
|
2022-11-27 19:20:29 +01:00
|
|
|
// SPDX-License-Identifier: MIT
|
2022-09-02 21:18:23 +02:00
|
|
|
|
Enable forbidigo linter (#24278)
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:
- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense
I don't plan on investigating the individual issues any further.
<details>
<summary>Initial Lint Results</summary>
```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("TempDir %s\n", tmpDir)
^
contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)
^
contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Navigate to %s to open PR\n", url)
^
contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `xdg-open %s`\n", url)
^
contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)
^
contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)
^
contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("* Attempting git cherry-pick --continue")
^
contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Attempting git cherry-pick %s\n", sha)
^
contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s\n", currentBranch)
^
contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)
^
contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)
^
contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)
^
contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s main`\n", remote)
^
contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)
^
contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Unsupported RDBMS for integration tests")
^
models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("LoadFixtures failed after retries: %v\n", err)
^
models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to generate sequence update: %v\n", err)
^
models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)
^
models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Environment variable $GITEA_ROOT not set")
^
models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)
^
models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)
^
models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to create temporary data path %v\n", err)
^
models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to InitFull: %v\n", err)
^
models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error: %v", err)
^
contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("CreateTestEngine: %+v", err)
^
contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("PrepareTestDatabase: %+v\n", err)
^
contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", r, err)
^
contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", g.name, err)
^
contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s created.\n", path)
^
services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
print Printer
^
modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())
^
tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf(format+"\n", args...)
^
tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
^
cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("%s\n", respText)
^
cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s's password has been successfully updated!\n", user.Name)
^
cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generated random password is '%s'\n", password)
^
cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created... %s\n", t.Token)
^
cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("New user '%s' has been successfully created!\n", username)
^
cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s\n", t.Token)
^
cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created: %s\n", t.Token)
^
cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)
^
cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")
^
cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")
^
cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("This command can only be used with a MySQL or MSSQL database")
^
cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")
^
cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(a.path)
^
cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Using app.ini at", setting.CustomConf)
^
cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Extracting to %s:\n", destdir)
^
cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s already exists; skipped.\n", dest)
^
cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(dest)
^
cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", internalToken)
^
cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", JWTSecretBase64)
^
cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", secretKey)
^
cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(strings.TrimSpace(authorizedString))
^
cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("warning: Content is empty")
^
cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("Proceed with sending email? [Y/n] ")
^
cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("The mail was not sent")
^
cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)
^
cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Gitea: SSH has been disabled")
^
cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("error showing subcommand help: %v\n", err)
^
cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")
^
cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("If this is unexpected, please log in with password and setup Gitea under another user.")
^
cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print(`{"type":"gitea","version":1}`)
^
tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stderr.String())
^
tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", resp.Body)
^
```
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-24 11:50:58 +02:00
|
|
|
//nolint:forbidigo
|
2022-09-02 21:18:23 +02:00
|
|
|
package tests
|
|
|
|
|
|
|
|
|
|
import (
|
|
|
|
|
"context"
|
|
|
|
|
"database/sql"
|
|
|
|
|
"fmt"
|
|
|
|
|
"os"
|
|
|
|
|
"path"
|
|
|
|
|
"path/filepath"
|
|
|
|
|
"testing"
|
|
|
|
|
|
2023-02-23 15:11:56 +01:00
|
|
|
"code.gitea.io/gitea/models/db"
|
|
|
|
|
packages_model "code.gitea.io/gitea/models/packages"
|
2022-09-02 21:18:23 +02:00
|
|
|
"code.gitea.io/gitea/models/unittest"
|
|
|
|
|
"code.gitea.io/gitea/modules/base"
|
|
|
|
|
"code.gitea.io/gitea/modules/git"
|
|
|
|
|
"code.gitea.io/gitea/modules/graceful"
|
|
|
|
|
"code.gitea.io/gitea/modules/log"
|
|
|
|
|
repo_module "code.gitea.io/gitea/modules/repository"
|
|
|
|
|
"code.gitea.io/gitea/modules/setting"
|
|
|
|
|
"code.gitea.io/gitea/modules/storage"
|
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
2023-05-08 13:49:59 +02:00
|
|
|
"code.gitea.io/gitea/modules/testlogger"
|
2022-09-02 21:18:23 +02:00
|
|
|
"code.gitea.io/gitea/modules/util"
|
|
|
|
|
"code.gitea.io/gitea/routers"
|
|
|
|
|
|
|
|
|
|
"github.com/stretchr/testify/assert"
|
|
|
|
|
)
|
|
|
|
|
|
2023-07-04 20:36:08 +02:00
|
|
|
func exitf(format string, args ...any) {
|
2023-04-19 15:40:42 +02:00
|
|
|
fmt.Printf(format+"\n", args...)
|
|
|
|
|
os.Exit(1)
|
|
|
|
|
}
|
|
|
|
|
|
2022-09-02 21:18:23 +02:00
|
|
|
func InitTest(requireGitea bool) {
|
Rewrite logger system (#24726)
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close #12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-22 00:35:11 +02:00
|
|
|
log.RegisterEventWriter("test", testlogger.NewTestLoggerWriter)
|
|
|
|
|
|
2022-09-02 21:18:23 +02:00
|
|
|
giteaRoot := base.SetupGiteaRoot()
|
|
|
|
|
if giteaRoot == "" {
|
2023-04-19 15:40:42 +02:00
|
|
|
exitf("Environment variable $GITEA_ROOT not set")
|
2022-09-02 21:18:23 +02:00
|
|
|
}
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
|
2023-08-10 04:05:37 +02:00
|
|
|
// TODO: Speedup tests that rely on the event source ticker, confirm whether there is any bug or failure.
|
|
|
|
|
// setting.UI.Notification.EventSourceUpdateTime = time.Second
|
2023-08-01 19:57:11 +02:00
|
|
|
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
setting.IsInTesting = true
|
2023-04-19 15:40:42 +02:00
|
|
|
setting.AppWorkPath = giteaRoot
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
setting.CustomPath = filepath.Join(setting.AppWorkPath, "custom")
|
2022-09-02 21:18:23 +02:00
|
|
|
if requireGitea {
|
|
|
|
|
giteaBinary := "gitea"
|
2023-04-19 15:40:42 +02:00
|
|
|
if setting.IsWindows {
|
2022-09-02 21:18:23 +02:00
|
|
|
giteaBinary += ".exe"
|
|
|
|
|
}
|
|
|
|
|
setting.AppPath = path.Join(giteaRoot, giteaBinary)
|
|
|
|
|
if _, err := os.Stat(setting.AppPath); err != nil {
|
2023-04-19 15:40:42 +02:00
|
|
|
exitf("Could not find gitea binary at %s", setting.AppPath)
|
2022-09-02 21:18:23 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
giteaConf := os.Getenv("GITEA_CONF")
|
|
|
|
|
if giteaConf == "" {
|
2023-04-19 15:40:42 +02:00
|
|
|
// By default, use sqlite.ini for testing, then IDE like GoLand can start the test process with debugger.
|
|
|
|
|
// It's easier for developers to debug bugs step by step with a debugger.
|
|
|
|
|
// Notice: when doing "ssh push", Gitea executes sub processes, debugger won't work for the sub processes.
|
|
|
|
|
giteaConf = "tests/sqlite.ini"
|
|
|
|
|
_ = os.Setenv("GITEA_CONF", giteaConf)
|
|
|
|
|
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
|
|
|
|
|
if !setting.EnableSQLite3 {
|
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
2023-05-08 13:49:59 +02:00
|
|
|
exitf(`sqlite3 requires: import _ "github.com/mattn/go-sqlite3" or -tags sqlite,sqlite_unlock_notify`)
|
2023-04-19 15:40:42 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if !path.IsAbs(giteaConf) {
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
setting.CustomConf = filepath.Join(giteaRoot, giteaConf)
|
2022-09-02 21:18:23 +02:00
|
|
|
} else {
|
|
|
|
|
setting.CustomConf = giteaConf
|
|
|
|
|
}
|
|
|
|
|
|
2023-05-04 05:55:35 +02:00
|
|
|
unittest.InitSettings()
|
2022-09-02 21:18:23 +02:00
|
|
|
setting.Repository.DefaultBranch = "master" // many test code still assume that default branch is called "master"
|
|
|
|
|
_ = util.RemoveAll(repo_module.LocalCopyPath())
|
|
|
|
|
|
|
|
|
|
if err := git.InitFull(context.Background()); err != nil {
|
|
|
|
|
log.Fatal("git.InitOnceWithSync: %v", err)
|
|
|
|
|
}
|
|
|
|
|
|
2023-02-19 17:12:01 +01:00
|
|
|
setting.LoadDBSetting()
|
2022-09-02 21:18:23 +02:00
|
|
|
if err := storage.Init(); err != nil {
|
2023-04-19 15:40:42 +02:00
|
|
|
exitf("Init storage failed: %v", err)
|
2022-09-02 21:18:23 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch {
|
2023-03-07 11:51:06 +01:00
|
|
|
case setting.Database.Type.IsMySQL():
|
2022-09-02 21:18:23 +02:00
|
|
|
connType := "tcp"
|
|
|
|
|
if len(setting.Database.Host) > 0 && setting.Database.Host[0] == '/' { // looks like a unix socket
|
|
|
|
|
connType = "unix"
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
db, err := sql.Open("mysql", fmt.Sprintf("%s:%s@%s(%s)/",
|
|
|
|
|
setting.Database.User, setting.Database.Passwd, connType, setting.Database.Host))
|
|
|
|
|
defer db.Close()
|
|
|
|
|
if err != nil {
|
|
|
|
|
log.Fatal("sql.Open: %v", err)
|
|
|
|
|
}
|
|
|
|
|
if _, err = db.Exec(fmt.Sprintf("CREATE DATABASE IF NOT EXISTS %s", setting.Database.Name)); err != nil {
|
|
|
|
|
log.Fatal("db.Exec: %v", err)
|
|
|
|
|
}
|
2023-03-07 11:51:06 +01:00
|
|
|
case setting.Database.Type.IsPostgreSQL():
|
2022-09-02 21:18:23 +02:00
|
|
|
var db *sql.DB
|
|
|
|
|
var err error
|
|
|
|
|
if setting.Database.Host[0] == '/' {
|
|
|
|
|
db, err = sql.Open("postgres", fmt.Sprintf("postgres://%s:%s@/%s?sslmode=%s&host=%s",
|
|
|
|
|
setting.Database.User, setting.Database.Passwd, setting.Database.Name, setting.Database.SSLMode, setting.Database.Host))
|
|
|
|
|
} else {
|
|
|
|
|
db, err = sql.Open("postgres", fmt.Sprintf("postgres://%s:%s@%s/%s?sslmode=%s",
|
|
|
|
|
setting.Database.User, setting.Database.Passwd, setting.Database.Host, setting.Database.Name, setting.Database.SSLMode))
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
defer db.Close()
|
|
|
|
|
if err != nil {
|
|
|
|
|
log.Fatal("sql.Open: %v", err)
|
|
|
|
|
}
|
|
|
|
|
dbrows, err := db.Query(fmt.Sprintf("SELECT 1 FROM pg_database WHERE datname = '%s'", setting.Database.Name))
|
|
|
|
|
if err != nil {
|
|
|
|
|
log.Fatal("db.Query: %v", err)
|
|
|
|
|
}
|
|
|
|
|
defer dbrows.Close()
|
|
|
|
|
|
|
|
|
|
if !dbrows.Next() {
|
|
|
|
|
if _, err = db.Exec(fmt.Sprintf("CREATE DATABASE %s", setting.Database.Name)); err != nil {
|
|
|
|
|
log.Fatal("db.Exec: CREATE DATABASE: %v", err)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
// Check if we need to setup a specific schema
|
|
|
|
|
if len(setting.Database.Schema) == 0 {
|
|
|
|
|
break
|
|
|
|
|
}
|
|
|
|
|
db.Close()
|
|
|
|
|
|
|
|
|
|
if setting.Database.Host[0] == '/' {
|
|
|
|
|
db, err = sql.Open("postgres", fmt.Sprintf("postgres://%s:%s@/%s?sslmode=%s&host=%s",
|
|
|
|
|
setting.Database.User, setting.Database.Passwd, setting.Database.Name, setting.Database.SSLMode, setting.Database.Host))
|
|
|
|
|
} else {
|
|
|
|
|
db, err = sql.Open("postgres", fmt.Sprintf("postgres://%s:%s@%s/%s?sslmode=%s",
|
|
|
|
|
setting.Database.User, setting.Database.Passwd, setting.Database.Host, setting.Database.Name, setting.Database.SSLMode))
|
|
|
|
|
}
|
|
|
|
|
// This is a different db object; requires a different Close()
|
|
|
|
|
defer db.Close()
|
|
|
|
|
if err != nil {
|
|
|
|
|
log.Fatal("sql.Open: %v", err)
|
|
|
|
|
}
|
|
|
|
|
schrows, err := db.Query(fmt.Sprintf("SELECT 1 FROM information_schema.schemata WHERE schema_name = '%s'", setting.Database.Schema))
|
|
|
|
|
if err != nil {
|
|
|
|
|
log.Fatal("db.Query: %v", err)
|
|
|
|
|
}
|
|
|
|
|
defer schrows.Close()
|
|
|
|
|
|
|
|
|
|
if !schrows.Next() {
|
|
|
|
|
// Create and setup a DB schema
|
|
|
|
|
if _, err = db.Exec(fmt.Sprintf("CREATE SCHEMA %s", setting.Database.Schema)); err != nil {
|
|
|
|
|
log.Fatal("db.Exec: CREATE SCHEMA: %v", err)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2023-03-07 11:51:06 +01:00
|
|
|
case setting.Database.Type.IsMSSQL():
|
2022-09-02 21:18:23 +02:00
|
|
|
host, port := setting.ParseMSSQLHostPort(setting.Database.Host)
|
|
|
|
|
db, err := sql.Open("mssql", fmt.Sprintf("server=%s; port=%s; database=%s; user id=%s; password=%s;",
|
|
|
|
|
host, port, "master", setting.Database.User, setting.Database.Passwd))
|
|
|
|
|
if err != nil {
|
|
|
|
|
log.Fatal("sql.Open: %v", err)
|
|
|
|
|
}
|
|
|
|
|
if _, err := db.Exec(fmt.Sprintf("If(db_id(N'%s') IS NULL) BEGIN CREATE DATABASE %s; END;", setting.Database.Name, setting.Database.Name)); err != nil {
|
|
|
|
|
log.Fatal("db.Exec: %v", err)
|
|
|
|
|
}
|
|
|
|
|
defer db.Close()
|
|
|
|
|
}
|
|
|
|
|
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
routers.InitWebInstalled(graceful.GetManager().HammerContext())
|
2022-09-02 21:18:23 +02:00
|
|
|
}
|
|
|
|
|
|
2023-10-01 13:54:11 +02:00
|
|
|
func PrepareAttachmentsStorage(t testing.TB) {
|
|
|
|
|
// prepare attachments directory and files
|
|
|
|
|
assert.NoError(t, storage.Clean(storage.Attachments))
|
|
|
|
|
|
|
|
|
|
s, err := storage.NewStorage(setting.LocalStorageType, &setting.Storage{
|
|
|
|
|
Path: filepath.Join(filepath.Dir(setting.AppPath), "tests", "testdata", "data", "attachments"),
|
|
|
|
|
})
|
|
|
|
|
assert.NoError(t, err)
|
|
|
|
|
assert.NoError(t, s.IterateObjects("", func(p string, obj storage.Object) error {
|
|
|
|
|
_, err = storage.Copy(storage.Attachments, p, s, p)
|
|
|
|
|
return err
|
|
|
|
|
}))
|
|
|
|
|
}
|
|
|
|
|
|
2022-09-02 21:18:23 +02:00
|
|
|
func PrepareTestEnv(t testing.TB, skip ...int) func() {
|
|
|
|
|
t.Helper()
|
2023-08-12 18:30:16 +02:00
|
|
|
ourSkip := 1
|
2022-09-02 21:18:23 +02:00
|
|
|
if len(skip) > 0 {
|
|
|
|
|
ourSkip += skip[0]
|
|
|
|
|
}
|
|
|
|
|
deferFn := PrintCurrentTest(t, ourSkip)
|
2022-12-23 00:41:56 +01:00
|
|
|
|
|
|
|
|
// load database fixtures
|
2022-09-02 21:18:23 +02:00
|
|
|
assert.NoError(t, unittest.LoadFixtures())
|
2022-12-23 00:41:56 +01:00
|
|
|
|
|
|
|
|
// load git repo fixtures
|
2022-09-02 21:18:23 +02:00
|
|
|
assert.NoError(t, util.RemoveAll(setting.RepoRootPath))
|
|
|
|
|
assert.NoError(t, unittest.CopyDir(path.Join(filepath.Dir(setting.AppPath), "tests/gitea-repositories-meta"), setting.RepoRootPath))
|
|
|
|
|
ownerDirs, err := os.ReadDir(setting.RepoRootPath)
|
|
|
|
|
if err != nil {
|
|
|
|
|
assert.NoError(t, err, "unable to read the new repo root: %v\n", err)
|
|
|
|
|
}
|
|
|
|
|
for _, ownerDir := range ownerDirs {
|
|
|
|
|
if !ownerDir.Type().IsDir() {
|
|
|
|
|
continue
|
|
|
|
|
}
|
|
|
|
|
repoDirs, err := os.ReadDir(filepath.Join(setting.RepoRootPath, ownerDir.Name()))
|
|
|
|
|
if err != nil {
|
|
|
|
|
assert.NoError(t, err, "unable to read the new repo root: %v\n", err)
|
|
|
|
|
}
|
|
|
|
|
for _, repoDir := range repoDirs {
|
|
|
|
|
_ = os.MkdirAll(filepath.Join(setting.RepoRootPath, ownerDir.Name(), repoDir.Name(), "objects", "pack"), 0o755)
|
|
|
|
|
_ = os.MkdirAll(filepath.Join(setting.RepoRootPath, ownerDir.Name(), repoDir.Name(), "objects", "info"), 0o755)
|
|
|
|
|
_ = os.MkdirAll(filepath.Join(setting.RepoRootPath, ownerDir.Name(), repoDir.Name(), "refs", "heads"), 0o755)
|
|
|
|
|
_ = os.MkdirAll(filepath.Join(setting.RepoRootPath, ownerDir.Name(), repoDir.Name(), "refs", "tag"), 0o755)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2022-12-23 00:41:56 +01:00
|
|
|
// load LFS object fixtures
|
|
|
|
|
// (LFS storage can be on any of several backends, including remote servers, so we init it with the storage API)
|
2023-06-14 05:42:38 +02:00
|
|
|
lfsFixtures, err := storage.NewStorage(setting.LocalStorageType, &setting.Storage{
|
|
|
|
|
Path: filepath.Join(filepath.Dir(setting.AppPath), "tests/gitea-lfs-meta"),
|
|
|
|
|
})
|
2022-12-23 00:41:56 +01:00
|
|
|
assert.NoError(t, err)
|
|
|
|
|
assert.NoError(t, storage.Clean(storage.LFS))
|
2023-03-13 11:23:51 +01:00
|
|
|
assert.NoError(t, lfsFixtures.IterateObjects("", func(path string, _ storage.Object) error {
|
2022-12-23 00:41:56 +01:00
|
|
|
_, err := storage.Copy(storage.LFS, path, lfsFixtures, path)
|
|
|
|
|
return err
|
|
|
|
|
}))
|
|
|
|
|
|
2023-02-23 15:11:56 +01:00
|
|
|
// clear all package data
|
|
|
|
|
assert.NoError(t, db.TruncateBeans(db.DefaultContext,
|
|
|
|
|
&packages_model.Package{},
|
|
|
|
|
&packages_model.PackageVersion{},
|
|
|
|
|
&packages_model.PackageFile{},
|
|
|
|
|
&packages_model.PackageBlob{},
|
|
|
|
|
&packages_model.PackageProperty{},
|
|
|
|
|
&packages_model.PackageBlobUpload{},
|
|
|
|
|
&packages_model.PackageCleanupRule{},
|
|
|
|
|
))
|
|
|
|
|
assert.NoError(t, storage.Clean(storage.Packages))
|
|
|
|
|
|
2022-09-02 21:18:23 +02:00
|
|
|
return deferFn
|
|
|
|
|
}
|
|
|
|
|
|
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
2023-05-08 13:49:59 +02:00
|
|
|
func PrintCurrentTest(t testing.TB, skip ...int) func() {
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
t.Helper()
|
|
|
|
|
actualSkip := 1
|
|
|
|
|
if len(skip) > 0 {
|
|
|
|
|
actualSkip = skip[0] + 1
|
2022-09-02 21:18:23 +02:00
|
|
|
}
|
Refactor path & config system (#25330)
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
2023-06-21 07:50:26 +02:00
|
|
|
return testlogger.PrintCurrentTest(t, actualSkip)
|
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
2023-05-08 13:49:59 +02:00
|
|
|
}
|
2022-12-23 00:41:56 +01:00
|
|
|
|
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
2023-05-08 13:49:59 +02:00
|
|
|
// Printf takes a format and args and prints the string to os.Stdout
|
2023-07-04 20:36:08 +02:00
|
|
|
func Printf(format string, args ...any) {
|
Rewrite queue (#24505)
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
2023-05-08 13:49:59 +02:00
|
|
|
testlogger.Printf(format, args...)
|
|
|
|
|
}
|