[print:RedENDER-3 0.08mm Screw 0.4 nozzle] allow_emptnamey_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilineargapfill bottom_solid_layers = 7 bottom_solid_min_thickness = 0 bridge_acceleration = 1000 bridge_angle = 0 bridged_infill_margin = 200% bridge_flow_ratio = 80% bridge_overlap = 100% bridge_speed = 20 brim_ears = 1 brim_ears_max_angle = 120 brim_ears_pattern = concentric brim_inside_holes = 0 brim_offset = 0 brim_width = 0 brim_width_interior = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 complete_objects_one_skirt = 0 complete_objects_sort = object curve_smoothing_angle_concave = 170 curve_smoothing_angle_convex = 170 curve_smoothing_cutoff_dist = 2 curve_smoothing_precision = 0 default_acceleration = 1000 dont_support_bridges = 1 draft_shield = 0 duplicate_distance = 6 enforce_full_fill_volume = 1 ensure_vertical_shell_thickness = 1 exact_last_layer_height = 0 external_infill_margin = 150% external_perimeter_cut_corners = 0% external_perimeter_extrusion_width = 105% external_perimeter_overlap = 100% external_perimeters_first = 0 external_perimeters_hole = 1 external_perimeters_nothole = 1 external_perimeter_speed = 50% external_perimeters_vase = 0 extra_perimeters = 0 extra_perimeters_odd_layers = 0 extra_perimeters_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 25 extrusion_width = 110% fill_angle = 45 fill_angle_increment = 0 fill_density = 13% fill_pattern = gyroid fill_smooth_distribution = 10% fill_smooth_width = 50% fill_top_flow_ratio = 100% first_layer_acceleration = 1000 first_layer_extrusion_width = 140% first_layer_flow_ratio = 100% first_layer_height = 0.24 first_layer_infill_speed = 30 first_layer_size_compensation = -0.05 first_layer_speed = 30 gap_fill = 1 gap_fill_min_area = 100% gap_fill_overlap = 100% gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 hole_size_compensation = -0.03 hole_to_polyhole = 0 infill_acceleration = 1000 infill_connection = connected infill_dense = 1 infill_dense_algo = autosmall infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 22% infill_speed = 15 inherits = interface_shells = 0 layer_height = 0.08 max_print_speed = 100 max_volumetric_speed = 0 milling_after_z = 200% milling_extra_size = 150% milling_post_process = 0 milling_speed = 30 min_skirt_length = 4 min_width_top_surface = 200% model_precision = 0.0001 no_perimeter_unsupported_algo = none notes = only_one_perimeter_top = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode over_bridge_flow_ratio = 110% overhangs_reverse = 0 overhangs_reverse_threshold = 250% overhangs_width = 75% overhangs_width_speed = 50% perimeter_acceleration = 400 perimeter_bonding = 0% perimeter_extruder = 1 perimeter_extrusion_width = 110% perimeter_loop = 0 perimeter_loop_seam = rear perimeter_overlap = 100% perimeters = 3 perimeter_speed = 30 post_process = print_extrusion_multiplier = 100% print_retract_length = -1 print_settings_id = print_temperature = 0 raft_layers = 0 resolution = 0 seam_position = hidden seam_travel = 0 single_extruder_multi_material_priming = 0 skirt_distance = 6 skirt_extrusion_width = 0 skirt_height = 3 skirts = 0 slice_closing_radius = 0.049 small_perimeter_max_length = 20 small_perimeter_min_length = 6 small_perimeter_speed = 25 solid_fill_pattern = rectilineargapfill solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 110% solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance_bottom = 0.15 support_material_contact_distance_top = 0.15 support_material_contact_distance_type = filament support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 110% support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.15 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_solid_first_layer = 1 support_material_spacing = 1 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 150% thin_perimeters = 0 thin_perimeters_all = 0 thin_walls = 1 thin_walls_merge = 1 thin_walls_min_width = 50% thin_walls_overlap = 50% thin_walls_speed = 30 threads = 12 top_fill_pattern = smooth top_infill_extrusion_width = 110% top_solid_infill_speed = 40 top_solid_layers = 7 top_solid_min_thickness = 0 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim = 150% wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_inner_size_compensation = 0 xy_size_compensation = 0 [print:RedENDER-3 0.08mm DETAIL 0.4 nozzle] allow_emptnamey_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilineargapfill bottom_solid_layers = 7 bottom_solid_min_thickness = 0 bridge_acceleration = 1000 bridge_angle = 0 bridged_infill_margin = 200% bridge_flow_ratio = 80% bridge_overlap = 100% bridge_speed = 20 brim_ears = 1 brim_ears_max_angle = 120 brim_ears_pattern = concentric brim_inside_holes = 0 brim_offset = 0 brim_width = 0 brim_width_interior = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 complete_objects_one_skirt = 0 complete_objects_sort = object curve_smoothing_angle_concave = 170 curve_smoothing_angle_convex = 170 curve_smoothing_cutoff_dist = 2 curve_smoothing_precision = 0 default_acceleration = 1000 dont_support_bridges = 1 draft_shield = 0 duplicate_distance = 6 enforce_full_fill_volume = 1 ensure_vertical_shell_thickness = 1 exact_last_layer_height = 0 external_infill_margin = 150% external_perimeter_cut_corners = 0% external_perimeter_extrusion_width = 105% external_perimeter_overlap = 100% external_perimeters_first = 0 external_perimeters_hole = 1 external_perimeters_nothole = 1 external_perimeter_speed = 50% external_perimeters_vase = 0 extra_perimeters = 0 extra_perimeters_odd_layers = 0 extra_perimeters_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 25 extrusion_width = 110% fill_angle = 45 fill_angle_increment = 0 fill_density = 13% fill_pattern = gyroid fill_smooth_distribution = 10% fill_smooth_width = 50% fill_top_flow_ratio = 100% first_layer_acceleration = 1000 first_layer_extrusion_width = 140% first_layer_flow_ratio = 100% first_layer_height = 0.24 first_layer_infill_speed = 30 first_layer_size_compensation = -0.05 first_layer_speed = 30 gap_fill = 1 gap_fill_min_area = 100% gap_fill_overlap = 100% gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 hole_size_compensation = -0.03 hole_to_polyhole = 0 infill_acceleration = 1000 infill_connection = connected infill_dense = 1 infill_dense_algo = autosmall infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 22% infill_speed = 80 inherits = interface_shells = 0 layer_height = 0.08 max_print_speed = 100 max_volumetric_speed = 0 milling_after_z = 200% milling_extra_size = 150% milling_post_process = 0 milling_speed = 30 min_skirt_length = 4 min_width_top_surface = 200% model_precision = 0.0001 no_perimeter_unsupported_algo = none notes = only_one_perimeter_top = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode over_bridge_flow_ratio = 110% overhangs_reverse = 0 overhangs_reverse_threshold = 250% overhangs_width = 75% overhangs_width_speed = 50% perimeter_acceleration = 400 perimeter_bonding = 0% perimeter_extruder = 1 perimeter_extrusion_width = 110% perimeter_loop = 0 perimeter_loop_seam = rear perimeter_overlap = 100% perimeters = 3 perimeter_speed = 60 post_process = print_extrusion_multiplier = 100% print_retract_length = -1 print_settings_id = print_temperature = 0 raft_layers = 0 resolution = 0 seam_position = hidden seam_travel = 0 single_extruder_multi_material_priming = 0 skirt_distance = 6 skirt_extrusion_width = 0 skirt_height = 3 skirts = 0 slice_closing_radius = 0.049 small_perimeter_max_length = 20 small_perimeter_min_length = 6 small_perimeter_speed = 25 solid_fill_pattern = rectilineargapfill solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 110% solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance_bottom = 0.15 support_material_contact_distance_top = 0.15 support_material_contact_distance_type = filament support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 110% support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.15 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_solid_first_layer = 1 support_material_spacing = 1 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 150% thin_perimeters = 0 thin_perimeters_all = 0 thin_walls = 1 thin_walls_merge = 1 thin_walls_min_width = 50% thin_walls_overlap = 50% thin_walls_speed = 30 threads = 12 top_fill_pattern = smooth top_infill_extrusion_width = 110% top_solid_infill_speed = 40 top_solid_layers = 7 top_solid_min_thickness = 0 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim = 150% wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_inner_size_compensation = 0 xy_size_compensation = 0 [print:RedENDER-3 0.16mm NORMAL 0.4 nozzle] allow_emptnamey_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilineargapfill bottom_solid_layers = 5 bottom_solid_min_thickness = 0 bridge_acceleration = 1000 bridge_angle = 0 bridged_infill_margin = 200% bridge_flow_ratio = 80% bridge_overlap = 100% bridge_speed = 20 brim_ears = 1 brim_ears_max_angle = 120 brim_ears_pattern = concentric brim_inside_holes = 0 brim_offset = 0 brim_width = 0 brim_width_interior = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 complete_objects_one_skirt = 0 complete_objects_sort = object curve_smoothing_angle_concave = 170 curve_smoothing_angle_convex = 170 curve_smoothing_cutoff_dist = 2 curve_smoothing_precision = 0 default_acceleration = 1000 dont_support_bridges = 1 draft_shield = 0 duplicate_distance = 6 enforce_full_fill_volume = 1 ensure_vertical_shell_thickness = 1 exact_last_layer_height = 0 external_infill_margin = 150% external_perimeter_cut_corners = 0% external_perimeter_extrusion_width = 105% external_perimeter_overlap = 100% external_perimeters_first = 0 external_perimeters_hole = 1 external_perimeters_nothole = 1 external_perimeter_speed = 50% external_perimeters_vase = 0 extra_perimeters = 0 extra_perimeters_odd_layers = 0 extra_perimeters_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 25 extrusion_width = 110% fill_angle = 45 fill_angle_increment = 0 fill_density = 13% fill_pattern = gyroid fill_smooth_distribution = 10% fill_smooth_width = 50% fill_top_flow_ratio = 100% first_layer_acceleration = 1000 first_layer_extrusion_width = 140% first_layer_flow_ratio = 100% first_layer_height = 0.24 first_layer_infill_speed = 30 first_layer_size_compensation = -0.05 first_layer_speed = 30 gap_fill = 1 gap_fill_min_area = 100% gap_fill_overlap = 100% gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 hole_size_compensation = -0.03 hole_to_polyhole = 0 infill_acceleration = 1000 infill_connection = connected infill_dense = 1 infill_dense_algo = autosmall infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 22% infill_speed = 80 inherits = interface_shells = 0 layer_height = 0.16 max_print_speed = 100 max_volumetric_speed = 0 milling_after_z = 200% milling_extra_size = 150% milling_post_process = 0 milling_speed = 30 min_skirt_length = 4 min_width_top_surface = 200% model_precision = 0.0001 no_perimeter_unsupported_algo = none notes = only_one_perimeter_top = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode over_bridge_flow_ratio = 110% overhangs_reverse = 0 overhangs_reverse_threshold = 250% overhangs_width = 75% overhangs_width_speed = 50% perimeter_acceleration = 800 perimeter_bonding = 0% perimeter_extruder = 1 perimeter_extrusion_width = 110% perimeter_loop = 0 perimeter_loop_seam = rear perimeter_overlap = 100% perimeters = 3 perimeter_speed = 60 post_process = print_extrusion_multiplier = 100% print_retract_length = -1 print_settings_id = print_temperature = 0 raft_layers = 0 resolution = 0 seam_position = hidden seam_travel = 0 single_extruder_multi_material_priming = 0 skirt_distance = 6 skirt_extrusion_width = 0 skirt_height = 3 skirts = 0 slice_closing_radius = 0.049 small_perimeter_max_length = 20 small_perimeter_min_length = 6 small_perimeter_speed = 25 solid_fill_pattern = rectilineargapfill solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 110% solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance_bottom = 0.15 support_material_contact_distance_top = 0.15 support_material_contact_distance_type = filament support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 110% support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.15 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_solid_first_layer = 1 support_material_spacing = 1 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 150% thin_perimeters = 0 thin_perimeters_all = 0 thin_walls = 1 thin_walls_merge = 1 thin_walls_min_width = 50% thin_walls_overlap = 50% thin_walls_speed = 30 threads = 12 top_fill_pattern = smooth top_infill_extrusion_width = 110% top_solid_infill_speed = 40 top_solid_layers = 5 top_solid_min_thickness = 0 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim = 150% wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_inner_size_compensation = 0 xy_size_compensation = 0 [print:RedENDER-3 0.24mm NORMAL 0.4 nozzle] allow_emptnamey_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilineargapfill bottom_solid_layers = 4 bottom_solid_min_thickness = 0 bridge_acceleration = 1000 bridge_angle = 0 bridged_infill_margin = 200% bridge_flow_ratio = 90% bridge_overlap = 100% bridge_speed = 20 brim_ears = 1 brim_ears_max_angle = 120 brim_ears_pattern = concentric brim_inside_holes = 0 brim_offset = 0 brim_width = 0 brim_width_interior = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 complete_objects_one_skirt = 0 complete_objects_sort = object curve_smoothing_angle_concave = 170 curve_smoothing_angle_convex = 170 curve_smoothing_cutoff_dist = 2 curve_smoothing_precision = 0 default_acceleration = 1000 dont_support_bridges = 1 draft_shield = 0 duplicate_distance = 6 enforce_full_fill_volume = 1 ensure_vertical_shell_thickness = 1 exact_last_layer_height = 0 external_infill_margin = 150% external_perimeter_cut_corners = 0% external_perimeter_extrusion_width = 105% external_perimeter_overlap = 100% external_perimeters_first = 0 external_perimeters_hole = 1 external_perimeters_nothole = 1 external_perimeter_speed = 50% external_perimeters_vase = 0 extra_perimeters = 0 extra_perimeters_odd_layers = 0 extra_perimeters_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 25 extrusion_width = 110% fill_angle = 45 fill_angle_increment = 0 fill_density = 13% fill_pattern = gyroid fill_smooth_distribution = 10% fill_smooth_width = 50% fill_top_flow_ratio = 100% first_layer_acceleration = 1000 first_layer_extrusion_width = 140% first_layer_flow_ratio = 100% first_layer_height = 0.24 first_layer_infill_speed = 30 first_layer_size_compensation = -0.05 first_layer_speed = 30 gap_fill = 1 gap_fill_min_area = 100% gap_fill_overlap = 100% gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 hole_size_compensation = -0.03 hole_to_polyhole = 0 infill_acceleration = 1000 infill_connection = connected infill_dense = 1 infill_dense_algo = autosmall infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 22% infill_speed = 80 inherits = interface_shells = 0 layer_height = 0.24 max_print_speed = 100 max_volumetric_speed = 0 milling_after_z = 200% milling_extra_size = 150% milling_post_process = 0 milling_speed = 30 min_skirt_length = 4 min_width_top_surface = 200% model_precision = 0.0001 no_perimeter_unsupported_algo = none notes = only_one_perimeter_top = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode over_bridge_flow_ratio = 110% overhangs_reverse = 0 overhangs_reverse_threshold = 250% overhangs_width = 75% overhangs_width_speed = 50% perimeter_acceleration = 800 perimeter_bonding = 0% perimeter_extruder = 1 perimeter_extrusion_width = 110% perimeter_loop = 0 perimeter_loop_seam = rear perimeter_overlap = 100% perimeters = 3 perimeter_speed = 60 post_process = print_extrusion_multiplier = 100% print_retract_length = -1 print_settings_id = print_temperature = 0 raft_layers = 0 resolution = 0 seam_position = hidden seam_travel = 0 single_extruder_multi_material_priming = 0 skirt_distance = 6 skirt_extrusion_width = 0 skirt_height = 3 skirts = 0 slice_closing_radius = 0.049 small_perimeter_max_length = 20 small_perimeter_min_length = 6 small_perimeter_speed = 25 solid_fill_pattern = rectilineargapfill solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 110% solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance_bottom = 0.15 support_material_contact_distance_top = 0.15 support_material_contact_distance_type = filament support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 110% support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.15 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_solid_first_layer = 1 support_material_spacing = 1 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 150% thin_perimeters = 0 thin_perimeters_all = 0 thin_walls = 1 thin_walls_merge = 1 thin_walls_min_width = 50% thin_walls_overlap = 50% thin_walls_speed = 30 threads = 12 top_fill_pattern = smooth top_infill_extrusion_width = 110% top_solid_infill_speed = 40 top_solid_layers = 4 top_solid_min_thickness = 0 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim = 150% wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_inner_size_compensation = 0 xy_size_compensation = 0 [print:RedENDER-3 0.32mm NORMAL 0.4 nozzle] allow_emptnamey_layers = 0 avoid_crossing_not_first_layer = 1 avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilineargapfill bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 1000 bridge_angle = 0 bridged_infill_margin = 200% bridge_flow_ratio = 90% bridge_overlap = 100% bridge_speed = 20 brim_ears = 1 brim_ears_max_angle = 120 brim_ears_pattern = concentric brim_inside_holes = 0 brim_offset = 0 brim_width = 0 brim_width_interior = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 complete_objects_one_skirt = 0 complete_objects_sort = object curve_smoothing_angle_concave = 170 curve_smoothing_angle_convex = 170 curve_smoothing_cutoff_dist = 2 curve_smoothing_precision = 0 default_acceleration = 1000 dont_support_bridges = 1 draft_shield = 0 duplicate_distance = 6 enforce_full_fill_volume = 1 ensure_vertical_shell_thickness = 1 exact_last_layer_height = 0 external_infill_margin = 150% external_perimeter_cut_corners = 0% external_perimeter_extrusion_width = 105% external_perimeter_overlap = 100% external_perimeters_first = 0 external_perimeters_hole = 1 external_perimeters_nothole = 1 external_perimeter_speed = 50% external_perimeters_vase = 0 extra_perimeters = 0 extra_perimeters_odd_layers = 0 extra_perimeters_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 25 extrusion_width = 110% fill_angle = 45 fill_angle_increment = 0 fill_density = 13% fill_pattern = gyroid fill_smooth_distribution = 10% fill_smooth_width = 50% fill_top_flow_ratio = 100% first_layer_acceleration = 1000 first_layer_extrusion_width = 140% first_layer_flow_ratio = 100% first_layer_height = 0.24 first_layer_infill_speed = 30 first_layer_size_compensation = -0.05 first_layer_speed = 30 gap_fill = 1 gap_fill_min_area = 100% gap_fill_overlap = 100% gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 hole_size_compensation = -0.03 hole_to_polyhole = 0 infill_acceleration = 1000 infill_connection = connected infill_dense = 1 infill_dense_algo = autosmall infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 22% infill_speed = 80 inherits = interface_shells = 0 layer_height = 0.32 max_print_speed = 100 max_volumetric_speed = 0 milling_after_z = 200% milling_extra_size = 150% milling_post_process = 0 milling_speed = 30 min_skirt_length = 4 min_width_top_surface = 200% model_precision = 0.0001 no_perimeter_unsupported_algo = none notes = only_one_perimeter_top = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode over_bridge_flow_ratio = 110% overhangs_reverse = 0 overhangs_reverse_threshold = 250% overhangs_width = 75% overhangs_width_speed = 50% perimeter_acceleration = 800 perimeter_bonding = 0% perimeter_extruder = 1 perimeter_extrusion_width = 110% perimeter_loop = 0 perimeter_loop_seam = rear perimeter_overlap = 100% perimeters = 3 perimeter_speed = 60 post_process = print_extrusion_multiplier = 100% print_retract_length = -1 print_settings_id = print_temperature = 0 raft_layers = 0 resolution = 0 seam_position = hidden seam_travel = 0 single_extruder_multi_material_priming = 0 skirt_distance = 6 skirt_extrusion_width = 0 skirt_height = 3 skirts = 0 slice_closing_radius = 0.049 small_perimeter_max_length = 20 small_perimeter_min_length = 6 small_perimeter_speed = 25 solid_fill_pattern = rectilineargapfill solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 110% solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance_bottom = 0.15 support_material_contact_distance_top = 0.15 support_material_contact_distance_type = filament support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 110% support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.15 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_solid_first_layer = 1 support_material_spacing = 1 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 150% thin_perimeters = 0 thin_perimeters_all = 0 thin_walls = 1 thin_walls_merge = 1 thin_walls_min_width = 50% thin_walls_overlap = 50% thin_walls_speed = 30 threads = 12 top_fill_pattern = smooth top_infill_extrusion_width = 110% top_solid_infill_speed = 40 top_solid_layers = 3 top_solid_min_thickness = 0 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim = 150% wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_inner_size_compensation = 0 xy_size_compensation = 0 [filament:RedENDER-3 PLA] bed_temperature = 60 bridge_fan_speed = 100 chamber_temperature = 0 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 end_filament_gcode = "; Filament-specific end gcode" external_perimeter_fan_speed = -1 extrusion_multiplier = 0.9 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #FF3232 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cooling_zone_pause = 0 filament_cost = 20 filament_density = 1.24 filament_deretract_speed = nil filament_diameter = 1.75 filament_dip_extraction_speed = 70 filament_dip_insertion_speed = 33 filament_enable_toolchange_part_fan = 0 filament_enable_toolchange_temp = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_load_time = 0 filament_max_speed = 0 filament_max_volumentric_speed = 14 filament_max_volumetric_speed = 11 filament_max_wipe_tower_speed = 0 filament_melt_zone_pause = 0 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "" filament_shrink = 100% filament_skinnydip_distance = 31 filament_soluble = 0 filament_toolchange_delay = 0 filament_toolchange_part_fan_speed = 50 filament_toolchange_temp = 200 filament_type = PLA filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_unload_time = 0 filament_use_fast_skinnydip = 0 filament_use_skinnydip = 0 filament_vendor = (Unknown) filament_wipe = nil filament_wipe_advanced_pigment = 0.5 filament_wipe_extra_perimeter = nil first_layer_bed_temperature = 50 first_layer_temperature = 200 inherits = max_fan_speed = 100 max_speed_reduction = 90% min_fan_speed = 0 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 205 top_fan_speed = 100 [filament:RedENDER-3 ABS] bed_temperature = 70 bridge_fan_speed = 30 chamber_temperature = 0 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode" external_perimeter_fan_speed = -1 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #3A80CA filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cooling_zone_pause = 0 filament_cost = 20 filament_density = 1.04 filament_deretract_speed = nil filament_diameter = 1.75 filament_dip_extraction_speed = 70 filament_dip_insertion_speed = 33 filament_enable_toolchange_part_fan = 0 filament_enable_toolchange_temp = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_load_time = 0 filament_max_speed = 0 filament_max_volumentric_speed = 11 filament_max_volumetric_speed = 11 filament_max_wipe_tower_speed = 0 filament_melt_zone_pause = 0 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "" filament_shrink = 100% filament_skinnydip_distance = 31 filament_soluble = 0 filament_toolchange_delay = 0 filament_toolchange_part_fan_speed = 50 filament_toolchange_temp = 200 filament_type = ABS filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_unload_time = 0 filament_use_fast_skinnydip = 0 filament_use_skinnydip = 0 filament_vendor = (Unknown) filament_wipe = nil filament_wipe_advanced_pigment = 0.5 filament_wipe_extra_perimeter = nil first_layer_bed_temperature = 100 first_layer_temperature = 230 inherits = max_fan_speed = 0 max_speed_reduction = 90% min_fan_speed = 0 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 235 top_fan_speed = -1 [filament:RedENDER-3 PETG] bed_temperature = 70 bridge_fan_speed = 100 chamber_temperature = 0 compatible_printers = compatible_printers_condition = printer_notes=~/.*creality.*/ compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode" external_perimeter_fan_speed = -1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_colour = #FF8000 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cooling_zone_pause = 0 filament_cost = 20 filament_density = 1.45 filament_deretract_speed = nil filament_diameter = 1.75 filament_dip_extraction_speed = 70 filament_dip_insertion_speed = 33 filament_enable_toolchange_part_fan = 0 filament_enable_toolchange_temp = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_load_time = 0 filament_max_speed = 0 filament_max_volumentric_speed = 8 filament_max_volumetric_speed = 11 filament_max_wipe_tower_speed = 0 filament_melt_zone_pause = 0 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "" filament_shrink = 100% filament_skinnydip_distance = 31 filament_soluble = 0 filament_toolchange_delay = 0 filament_toolchange_part_fan_speed = 50 filament_toolchange_temp = 200 filament_type = PETG filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_unload_time = 0 filament_use_fast_skinnydip = 0 filament_use_skinnydip = 0 filament_vendor = (Unknown) filament_wipe = nil filament_wipe_advanced_pigment = 0.5 filament_wipe_extra_perimeter = nil first_layer_bed_temperature = 70 first_layer_temperature = 215 inherits = max_fan_speed = 40 max_speed_reduction = 90% min_fan_speed = 0 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 220 top_fan_speed = 20 [printer:RedENDER-3 0.4 nozzle] bed_custom_model = bed_custom_texture = bed_shape = 0x0,232x0,232x232,0x232 before_layer_gcode = ;BEFORE_LAYER_CHANGEn;[layer_z]nn between_objects_gcode = cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_filament_profile = "Creality PLA" default_print_profile = 0.16mm NORMAL 0.4 nozzle deretract_speed = 40 end_gcode = END_PRINT extra_loading_move = -2 extruder_colour = #FFFF00 extruder_fan_offset = 0% extruder_offset = 0x0 extruder_temperature_offset = 0 fan_speedup_time = -1 feature_gcode = gcode_flavor = marlin high_current_on_filament_swap = 0 host_type = octoprint inherits = layer_gcode = ;AFTER_LAYER_CHANGEn;[layer_z] machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 500 machine_max_acceleration_retracting = 1000 machine_max_acceleration_travel = 1500,1250 machine_max_acceleration_x = 500 machine_max_acceleration_y = 500 machine_max_acceleration_z = 100 machine_max_feedrate_e = 60 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 10 machine_max_jerk_e = 5 machine_max_jerk_x = 8 machine_max_jerk_y = 8 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 max_layer_height = 0.32 max_print_height = 250 milling_diameter = milling_toolchange_end_gcode = milling_toolchange_start_gcode = milling_z_lift = min_layer_height = 0.04 min_length = 0.035 nozzle_diameter = 0.4 parking_pos_retraction = 92 printer_model = ENDER-3 printer_notes = Fan-made creality ender-3 printer profile. Please send me a github issue if this profile need tweaking.nPRINTER_HAS_BOWDEN printer_settings_id = printer_technology = FFF printer_variant = 0.4 printer_vendor = print_host = printhost_apikey = printhost_cafile = printhost_slug = print_machine_envelope = 0 remaining_times = 0 retract_before_travel = 2 retract_before_wipe = 70% retract_layer_change = 1 retract_length = 6 retract_length_toolchange = 1 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_lift_not_last_layer = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 60 serial_port = serial_speed = 250000 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = M109 S[first_layer_temperature]\nSTART_PRINT thumbnails = 0x0,0x0 thumbnails_color = #018aff thumbnails_custom_color = 0 thumbnails_with_bed = 1 time_estimation_compensation = 100% toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 wipe_advanced = 0 wipe_advanced_algo = linear wipe_advanced_multiplier = 60 wipe_advanced_nozzle_melted_volume = 120 wipe_extra_perimeter = 0 z_offset = 0 z_step = 0.005 [presets] filament = RedENDER-3 ABS print = RedENDER-3 0.32mm SPEED 0.4 nozzle printer = RedENDER-3 0.4 nozzle sla_material = sla_print =