# M600: Filament Change. This macro will pause the printer, move the
# tool to the change position, and retract the filament 50mm. Adjust
# the retraction settings for your own extruder. After filament has
# been changed, the print can be resumed from its previous position
# with the "RESUME" gcode.
[gcode_macro M600]
default_parameter_X: 50
default_parameter_Y: 0
default_parameter_Z: 10
gcode:
    SAVE_GCODE_STATE NAME=M600_state
    PAUSE
    G91
    G1 E-.8 F2700
    G1 Z{Z}
    G90
    G1 X{X} Y{Y} F3000
    G91
    G1 E-50  F1000
    G1 X0.1  F3000
    G1 E-50  F1000
    G1 X-0.1 F3000
    G1 E-50  F1000
    G1 X0.1  F3000
    G1 E-50  F1000
    G1 X-0.1 F3000
    G1 E-50  F1000
    G1 X0.1  F3000
    G1 E-50  F1000
    G1 X-0.1 F3000
    RESTORE_GCODE_STATE NAME=M600_state


# HMM? verify Does not work cause if it's sent by octoprint klipper will assume that octoprint must pause, which it won't....
#[gcode_macro BED_LEVEL]
#gcode:
    # Bed leveling Ender 3 by ingenioso3D
    # Modified by elproducts CHEP FilamentFriday.com
    
#    G90
    
#    G28 # Home all axis
#    G1 Z5 # Lift Z axis
#    G1 X32 Y36 # Move to Position 1
#    G1 Z0
#    PAUSE
#    G1 Z10 # Lift Z axis
#    G1 X32 Y206 # Move to Position 2
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X202 Y206 # Move to Position 3
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X202 Y36 # Move to Position 4
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X117 Y121 # Move to Position 5
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X32 Y206 # Move to Position 2
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X202 Y206 # Move to Position 3
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X202 Y36 # Move to Position 4
#    G1 Z0
#    PAUSE
#    G1 Z5 # Lift Z axis
#    G1 X32 Y36 # Move to Position 1
#    G1 Z0
#    PAUSE
#    
#    G28
#    M84 # disable motors

[gcode_macro PARK_WAIT]
default_parameter_X: 0    #edit to your park position
default_parameter_Y: 230    #edit to your park position
default_parameter_Z: 10     #edit to your park position
default_parameter_E: 20      #edit to your retract length
default_parameter_MILLIS: 5
gcode:
    SAVE_GCODE_STATE NAME=PAUSE_state
    G91
    G1 E-{E} F2100
    G1 Z{Z}
    G90
    G1 X{X} Y{Y} F6000
    
    G4 P{MILLIS}
    
    G91
    G1 E{E} F2100
    G90
    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1

[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
default_parameter_X: 0    #edit to your park position
default_parameter_Y: 230    #edit to your park position
default_parameter_Z: 10     #edit to your park position
default_parameter_E: 20      #edit to your retract length
gcode:
    SAVE_GCODE_STATE NAME=PAUSE_state
    BASE_PAUSE
    G91
    G1 E-{E} F2100
    G1 Z{Z}
    G90
    G1 X{X} Y{Y} F6000

[gcode_macro RESUME]
rename_existing: BASE_RESUME
default_parameter_E: 5      #edit to your retract length
gcode:
    G91
    G1 E{E} F2100
    G90
    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
    BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
gcode:
    TURN_OFF_HEATERS
    CLEAR_PAUSE
    SDCARD_RESET_FILE
    BASE_CANCEL_PRINT


[gcode_macro PRIME_LINE]
gcode: 
    G92 E0 # Reset Extruder
    G1 Z2.0 F3000 # Move Z Axis up little to prevent scratching of Heat Bed
    G1 X0.1 Y20 Z0.3 F5000.0 # Move to start position
    G1 X0.1 Y200.0 Z0.3 F1500.0 E15 # Draw the first line
    G1 X0.4 Y200.0 Z0.3 F5000.0 # Move to side a little
    G1 X0.4 Y20 Z0.3 F1500.0 E30 # Draw the second line
    G92 E0 # Reset Extruder
    G1 Z2.0 F3000 # Move Z Axis up little to prevent scratching of Heat Bed
    G1 X5 Y20 Z0.3 F5000.0 # Move over to prevent blob squish

[gcode_macro START_PRINT]
gcode:
    # Use absolute coordinates
    G90
    # Reset the G-Code Z offset (adjust Z offset if needed)
    SET_GCODE_OFFSET Z=0.93
    # Home the printer
    G28
    # Prime line
    PRIME_LINE

[gcode_macro END_PRINT]
gcode:
    G91 # Relative positioning
    G1 E-2 F2700 # Retract a bit
    G1 E-2 Z0.2 F2400 # Retract and raise Z
    G1 X5 Y5 F3000 # Wipe out
    G1 Z10 #Raise Z more
    G90 # Absolute positionning

    G1 X0 Y200 # Present print
    M106 S0 # Turn-off fan
    M104 S0 # Turn-off hotend
    M140 S0 # Turn-off bed

    M84 X Y E # Disable all steppers but Z